Author Topic: New video: Edward Mitchel  (Read 44661 times)

0 Members and 18 Guests are viewing this topic.

Offline Login to see usernames

  • Jr. member
  • *
  • Posts: 39
Re: New video: Edward Mitchel
« Reply #104 on: November 25, 2015, 04:06:50 am »
WTF didn't even know you were black.
That's not even relevant here.
Is there anyone throwing racial slurrs at you? I've never seen such.

Your ridiculous dude, and you create your own enemies because for some reason that's what you want because it confirms your belief that the whole world is against you, so you must be right about Stan. In your mind it's not you that's the problem, it's everyone else. I've known too many of your types to continue this.



Back to the topic of EV's...

The electric motor will eventually take over because they are more efficient than any internal combustion engine.
All that heat that escapes through the tailpipe, all that heat that is removed via the cooling system, that's all lost energy.
Think about the frictional losses through the cylinders, crank shaft, and transmission and all the other moving parts and compare them to an electric motor which only has one moving part.




Offline Login to see usernames

  • Global Moderator
  • Hero member
  • ****
  • Posts: 3889
To all
« Reply #105 on: November 25, 2015, 06:40:57 am »
Ed suffered racial injurement attack before he got banned few months ago, thats what he is talking about the fact of being hebrew... in my country this is subject of jail... here in the forum we dont have anyway to punish anyone but i´m sure it wont get to this point again too. Ed was baned because he talked about religion sequetialy while he was adverted to stop as this is a forum for technology and stanley meyer tech discussion.

I would kindly point how much waste of time reading thu lots of attacks and non scientific posts...

Please stop wasting your times, our space and alls patience....

We are here not to prove we have anything... nor to prove anyone is wrong .... we are here to share ideas and discuss them... with so much intolerance there will be no room for seeing whats good in each one idea... it all become a big crap ...

i acted in bad way in the past by imaturity for example i would not understand how water could be polarized with no current and i spent lot of energy discussing and discrediting others that were pointing this out,..  you see how much waste of time is to discuss a theory you dont really know when you really dont know all the science in the world?

i really lose the will of coming over here to see this fights over the boards and seeing that someone is being ignored or discredited in principle...

Ed may have a way of saying like if he had all done and right its his way of speaking, just that... i know because i mistakenly talked like this in the past...

If i could spend an advice on this it would be

 believe what you need to believe but walk with your foots on the ground steps come one after the other

my two cents....

My best regards

Offline Login to see usernames

  • Member
  • **
  • Posts: 180
Re: New video: Edward Mitchel
« Reply #106 on: November 25, 2015, 07:31:00 am »

EV will take over by design and investment control

steam trains are seen as dinosaurs yet nuclear power is a steam generator , no difference just alot more dangerous

EV will take away the level of freedom that a clattery ol IC engine has .   moon shiners made their own fuel , on that basis , who cares about efficieny and heat loss ?    free fuel = free efficiency = free heat loss
EV cannot equal that , imagine the control circuits , charging circuits etc , car electrical systems today are a night mare (gold mine for service maintainance)

the older the car the better

the history of Chrysler goes back to the electric car co , when EV out numbered IC cars in the late 1800s
over 100 yrs later the very same players are in control of the future.
not forgetting , there was also steam cars

curse electric cars , I grew up on mad max and battle truck , thats more my cuppa tea  ;)

Offline Login to see usernames

  • Member
  • **
  • Posts: 126
Re: New video: Edward Mitchel
« Reply #107 on: November 25, 2015, 09:44:32 am »
why didn't even know you were black.
That's not even relevant here.
Is there anyone throwing racial slurrs at you? I've never seen such.

Your ridiculous dude, and you create your own enemies because for some reason that's what you want because it confirms your belief that the whole world is against you, so you must be right about Stan. In your mind it's not you that's the problem, it's everyone else. I've known too many of your types to continue this.



Back to the topic of EV's...

The electric motor will eventually take over because they are more efficient than any internal combustion engine.
All that heat that escapes through the tailpipe, all that heat that is removed via the cooling system, that's all lost energy.
Think about the frictional losses through the cylinders, crank shaft, and transmission and all the other moving parts and compare them to an electric motor which only has one moving part.

You never took the time to actually watch the video this thread was made about? So, you just came in here to say what exactly? Couldn't be talking about the video as in your own words you never saw it. Well, in a not so round about way that is what you just said here, correct?

Give me a name of one of these people that says they are getting great results with this technology so that I may have the opportunity to compare notes with them. If not then what was the true purpose for your commenting at all on this thread of which you obviously know nothing about? TGS stands for True Green Solutions the company that is mentioned in the video.

I'd like to say thanks to Sebosfato for his account of what happened to me on this forum as it comes at a time when it truly is needed. Yes, I was attacked on this forum and got punished for being attacked instead of the guilty party(s) being punished like it should have been done. Then they want me to leave the bible out of it when Meyer himself ties it with this technology. They want me to keep talking about this technology so that they can have it without ever having to put in a dimes worth of R&D. Sebosfato I think I have been preaching to the wrong crowd as they don't like the hands on approach I have been taking and sharing and also requiring them to do. So, I will take this technology to those that actually want this technology. A place where it will be cherished and cared for and most of all wanted for the right reasons. In looking at the big picture the total members of this forum verses the world's population this forum means nothing and thus I can and will do better to find a crowd that does want this technology for the right reasons.

All this talk about EV's is also pointless as you have no idea what this technology is capable of nor do you understand what will be required to push the internal combustion engines off the road and replace them with something new. If a company can manage to produce and sell one million EV's a year how much time would it take them to replace over 3.2 billion cars with internal combustion engines in them? You see I have run similar numbers to these questions before and the numbers are for long term planning as it isn't going to be something that can be done in just a few years time. Plus you are asking for this to be done at a time when the US and other countries around the world are on the verge of bankruptcy facing a great depression that's going to make the depression of the 1930's look like a walk in the park. The  people have no money as the system that has been set up to rob them of all of their wealth has done exactly that and is nearing the end of it's long term mission.

As for me I will be moving on to someplace where justice has meaning. A place where TGS can start actually putting this technology out to this world and it be accepted by the people there. Always remember this, "this technology is only limited to the inventors abilities to find a use for it." But in order to make use of it you must first get at the core science that drives it as without this understanding you really can't make much use of this technology. Here I have repeatedly heard people say they simply will not give TGS any type of support no matter what happens so with that being said I say best of luck to you all with your efforts towards solving this technology. Perhaps one of these other people that Adriank talks about will pay this site an visit and share what he/she knows and be a person of your likeness so that they will be acceptable to you as your rejection of me is dully noted. That question I ask and had never answered will always be with me as I simply don't understand your rejection of the approach I took towards solving this technology as it was completely hands on making use of the scientific method as a tool to make sure the job was done right.

See ya around maybe, good luck.
TGS

Offline Login to see usernames

  • Jr. member
  • *
  • Posts: 39
Re: New video: Edward Mitchel
« Reply #108 on: November 26, 2015, 02:37:06 am »
I watched that video when it first came out. Very well built cells and Gunther's circuit is well engineered.

I'm not trying to hate just trying to point some things out. There might be a logical reason why people keep pushing you away and kicking you out of forums. If you want to be successful with Meyer's tech you can't just go around claiming sole ownership of it.
You get on these biblical high horses as if the great almighty granted you and only you the wisdom to unlock Meyer's secrets-Common man!

And yes I know 3 people who have successful replications that they can all repeat at any time. If they wanted their names to be known in the 'Meyer circle' they would be. Point is they simply have better things to do. But there is a fourth guy I do not know personally but just showed a working replication in front of 30 witnesses. You know him, Max Miller, I bet all that equipment he has you gave him, you made his cell, boards and tuned it for him right?

All I gotta say is if you think you can lead the pack with Meyer tech your wrong, no one can. If this tech ever got into the mainstream do you really think you can compete with corporations that can put millions of dollars into R&D? Corporations with real engineers and real scientists...

Oh wait you can because you have the great almighty on your side, HA~!

Offline Login to see usernames

  • Global Moderator
  • Hero member
  • ****
  • Posts: 3889
Re: New video: Edward Mitchel
« Reply #109 on: November 26, 2015, 03:30:06 am »
hahahahahahahaha   



Offline Login to see usernames

  • Member
  • **
  • Posts: 126
Re: New video: Edward Mitchel
« Reply #110 on: November 26, 2015, 08:23:14 am »
I watched that video when it first came out. Very well built cells and Gunther's circuit is well engineered.

I'm not trying to hate just trying to point some things out. There might be a logical reason why people keep pushing you away and kicking you out of forums. If you want to be successful with Meyer's tech you can't just go around claiming sole ownership of it.
You get on these biblical high horses as if the great almighty granted you and only you the wisdom to unlock Meyer's secrets-Common man!

And yes I know 3 people who have successful replications that they can all repeat at any time. If they wanted their names to be known in the 'Meyer circle' they would be. Point is they simply have better things to do. But there is a fourth guy I do not know personally but just showed a working replication in front of 30 witnesses. You know him, Max Miller, I bet all that equipment he has you gave him, you made his cell, boards and tuned it for him right?

All I gotta say is if you think you can lead the pack with Meyer tech your wrong, no one can. If this tech ever got into the mainstream do you really think you can compete with corporations that can put millions of dollars into R&D? Corporations with real engineers and real scientists...

Oh wait you can because you have the great almighty on your side, HA~!

Interesting point of view you have taken. Max and I use to work together. Did you know that I purchased his tickets to go to the 2013 Global BEM and other offered him free travel and room & board? While we were at the event Max went and stabbed us all in the back. Just before he had his event this past weekend we had a few words and in these talks I discovered that he doesn't understand how this technology actually works. At his event you will notice that he wouldn't do any timed temperature test or provide anyone with some MMW numbers so that his work could be evaluated properly by those that viewed it. Max and I broke it off once I saw that he was no longer listening to his experiments and forcing what he believed to be taking place on his experiments instead. Small world, huh? I am one of the few people that can actually tell he doesn't have the technology working correct. But like Russ, Max has learned how to put on a great show and the people that go to these shows don't ask him the hard questions. So, that's one crossed off of your list of people that claim to have this technology working correctly.

As for being chosen by the most high for this? All I know is I asked to be allowed to understand how this technology works and started to get a lot of strange dreams that lead me to understand how this technology actually works. Each time I would try and teach others what I had learned from these dreams I'd be shot down and rejected by practically all I would try and teach. So, it does make me wonder that my failure to be able to teach others is a sign that it just isn't meant for them to understand this technology. I don't know how all of this is going to play out but I do know that I have given up on trying to teach this technology and have moved on towards actually bringing it out instead as the numbers say I have been preaching to the wrong crowd as there is a whole world that needs this technology and someone is going to have to build it for them. When I posed the hard question to Open Source about how are those who can't build this technology for themselves supposed to be able to get this technology? The answer I was given let me know I was dealing with the wrong crowd as I was told "It sucks to be them." After this heart breaking reply to my question I started to break away from Open Source as they didn't stand for the same things I stood for. I only came back to this site due to a promise I made a long time ago. I fulfilled that promise, left the information up for a few months and then took it down due to the over whelming negativity I got from the members here. But I did live up to my promise. Now it's time for me to move on again as I wash my hands of these Open Source forums that have shown me nothing but greed, suffering, and ridicule.

As for the cell in the video it had to be replaced as it had flaws and errors in it's design and even it's replacement had to again be replaced for the very same reasons as I had to learn how to build the thing correctly by way of trial and error. Here are the other designs that lead up to the one I am using now.

(http://i1025.photobucket.com/albums/y320/h2opower/ER10ProductionpicsZ76.jpg)

(http://i1025.photobucket.com/albums/y320/h2opower/ER10ProductionpicsZ77.jpg)

(http://i1025.photobucket.com/albums/y320/h2opower/ER10ProductionpicsZ74.jpg)

And this is my current design with all the bugs worked out of it and some improvements made to the original Meyer design that solved the problems I saw he was having with the unit.

(http://i1025.photobucket.com/albums/y320/h2opower/IMG_4504_zpsfd724381.jpg)

(http://i1025.photobucket.com/albums/y320/h2opower/IMG_4515_zpsf51b3189.jpg)

Again all of this was done by way of trial and error until I got it right enough to stop having the problems I was seeing. The one in the video actually would take 12kv or more to get it to work correctly. The other one didn't have enough resistance in the form of water between the plates, and this new on has been designed to take all of these problems and more out of the device.

On this site I did as promised. I posted the solution but it was openly rejected and once I saw it's rejection was total and/or complete I removed it. I now yield to the Blind Leaders as I choose to no longer fight them. I have a mission in front of me that I will be following to the best of my abilities to do so. Like those you talked about but never mentioned I too am not looking for fame or glory but truly looking to help the poor. Unlike them I gave hope to the idea that this technology would be accepted by the Open Source community but I stand here now knowing that I was wrong about that as the propaganda is just too strong and I simply wasn't able to break through it. I will do as my heart tells me but know that it too can not be fully trusted as after all it is only human. I will do my best to obey the most high YAH and follow his commandments to the best of my abilities to do so as that is what is required of man and especially from his people as I am of the seed of Abraham, Issac, and Jacob and we made a covenant with the most high and are still bound by it. So, I bid you all farewell as I take on this next chapter of my life in service to the most high YAH the creator of all things.

Bye for now,
TGS

Offline Login to see usernames

  • Jr. member
  • *
  • Posts: 39
Re: New video: Edward Mitchel
« Reply #111 on: November 26, 2015, 09:26:19 am »
Very nice cells you have. Honestly that's good work, I know how much time and effort and $ it takes to get one made...

You could be right about Max. That is a good point because one thing many people are missing here is proper scientific documentation and measurements.

Anyways I would advise you to cover up your cells and connections between them with a conductive metal shield. You might also want to use some coax cable for your connections. When you really get things working the exposure to the radiation released will make you sicker than a dog. Trust me. It only takes operating the cell unshielded for a few minutes to make you sick for hours.

 I think it was artinvegas that said Stan was diagnosed Prostate cancer a few years before he died....Perhaps the radiation exposure over time had something to do with it? But for his age prostate cancer is not uncommon...
« Last Edit: November 29, 2015, 20:02:47 pm by Adriank »