Author Topic: New video: Edward Mitchel  (Read 44697 times)

0 Members and 19 Guests are viewing this topic.

Offline Login to see usernames

  • Member
  • **
  • Posts: 222
Re: New video: Edward Mitchel
« Reply #80 on: August 25, 2015, 17:09:37 pm »
well i could take the differential measurement somehow else its possible... but this probe allow you to have both connection points off ground with high voltage insulation.. this allow you to take measurements on places where if you connect a ground it kill the component actions...

You can do exactly this with the simple op amp circuit and some precision voltage divider resistors.

Offline Login to see usernames

  • Global Moderator
  • Hero member
  • ****
  • Posts: 3889
Re: New video: Edward Mitchel
« Reply #81 on: August 25, 2015, 17:20:58 pm »
do you have any schematic? i know in theory how is it operating but i´m not really that good to construct a meter with some certaincy maybe 10 % is workable precision...

i got my multimeter floating and could measure what goes on at tre cell... i know its not whatever multimeter that can handle it... i pay like 300$ in this one..others would start to blink and change function way before it reachs the 1/3 peak...

a good point to start would be the datasheet of the thing...it say it got 40Mohm imput impedance and its output impedance is to the oscilloscope... it has an adapter to to conver the impedance so it can be used in a dmm too...

it has got 20Mohm impedance per input and 15kv insulation between each input and ground... i happen to have here exacly those silicon 20kv cables that comes in this unit so i could build a replication... would you help?

thanks

 i have lm318 that ´m using for the feedback this suposedly are intended for this no? they are called differential amplifer...

so you are say that if i had a low voltage one i could upgrade it? wouldnt it loose accuracy?
« Last Edit: August 25, 2015, 17:44:42 pm by sebosfato »

Offline Login to see usernames

  • Member
  • **
  • Posts: 126
Re: New video: Edward Mitchel
« Reply #82 on: August 25, 2015, 18:07:21 pm »
Edd i think anyone that work in this technology today has a spirit of help the next although a commom problem today to all is this financial crisis... many of us are already married and they have their life to carry on normaly one would not spend more than 50$ at a time...

i tried fundraising before as i told you and got even a little mad when i saw nobody of my real life friend helped... i understand their side however... the only time when this fundraising worked was at the energetic forum right at the start some few people, i have here their names yet... from this forum also helped...

but man i really would be loosing my energy and time if i was to get mad if the crew cannot help today...

when i started this technology i was playing in the subway in milan and use to few hours playing and singing inside the train and at the end of the month i spend it all on 555 timers, transistors, copper, electrodes... well in the first months i remember to have gone with 20000euro. i always got some luky with the money for the technology... many of the high top equipment i get like labview 8000$ was totally free.. my cell was made at the university machines so i only spent like 1000$ or little more only of materials for just it..

i worked with platinum, paladium, barium titanate... i build a lathe milling maschine... i did manythings and aways someone somehow help...   now i get my tools to build things... that summing with the ability i learned to build whatever i want makes me really happy.

if we sum at least 9 years expending +_ 10000 euros each.. than i expended more than would cost to buy a house here... luckly i have no great ambition... but i feel that with my way of thinking and capabilities developed i can do more than just make it work...

thats why i dont really care about having spend all... but is understandable that anyone living and paying their bills dont want or some times cannot take some money out without a strong reason...

as a retribution to who wants to donate me a nice help for buying the probe, or that could lend me a probe like that or bring me one... i would offer 1 month in my beach house here in brazil for how many friends you want to bring or family how about it?

i could just say help me and could be enough that when it work you will be welcome to come and see ;D

i have very good contacts here in brazil, i worked with cinema and music, television here,  than  if we can prove this working i believe they can help somehow to get this technology to the world it would be no problem for me.

thank you all in advance


Sebosfato,

It's all about sacrifice as each and every person in these forums can go a day without a meal and give that money for that day to you. I have a family of six and yet I am willing to do my part to help you for I understand the meaning of sacrifice. So what if I have to go a day or two or even a week without eating big deal as this is for a good cause. Do you understand where I am coming from? All of us can do this without putting ourselves out too much but it comes down to choice and/or motive.

Remember what I told you. These forums are full of people that work for those that sell energy and their motive for being here is to keep this technology from coming out to the world as they will lose their livelihood. Just think of all the industries that are going to be put under when this technology goes mainstream. I am talking about any company that puts there power to the grid system and the grid system itself plus all of those that sell energy to power up the worlds moving machines. The only one that I can see that is sort of safe is solar but all of their solar farms will be gone as the take the energy they get from the sun and put it into a system of energy enslavement as that's just what the grid system is a system of energy enslavement.

They don't want you to get the right test equipment as you will start to see what I see and they can't have that. The need us all fighting tooth and nail so that nothing ever gets done and will tell you that, "Oh, you don't need to get the proper equipment just build your own." But they know you need precision to gain the scientific communities support and you are not going to get it with a home built item as you need the right tools for the job.

But like I said their fear is you will start to sound like me after you get the same tools I am using. And the more people that start sounding the same will show only one thing that this technology is in fact real and what we will be doing can be replicated by others. I already have others that have replicated what I am doing after they started listening to what I had to say and gave it a try in their labs. Trust me once you get this differential probe you will be able to see just what happens when the B+ and B- voltages are close to being equal plus a whole lot more. They can't have us working together like this for it spells the end of their way of life.

Like I said the best way to weed out friends from foes is to start a fundraiser as the foes will turn on you and withdraw all of their verbal support for you I know these things for it happened to me. Then you will find them starting counter threads to tell people you aren't telling the world the truth which is starting up a propaganda campaign against you. I've seen these things play out many times over since I started working on this technology back in 2006 and as such I have learned how this enemy operates as I've had to deal with them first hand.

Get a crowd fundraiser going as you have my support and if the people can see that I am willing to sacrifice for you given our past then just maybe they too will give you their support. Trust me when I tell you this those that are truly not your friends are going to turn on you but let them as they were truly never your friends in the first place. Like I said all it takes is for us to take a day without eating and give that money to you and I don't know a man or a woman alive that can't do that if they wanted too.

Shabbat Shalom,
TGS

Offline Login to see usernames

  • Global Moderator
  • Hero member
  • ****
  • Posts: 3889
Re: New video: Edward Mitchel
« Reply #83 on: August 25, 2015, 18:23:35 pm »
i have almost 1000 friend in facebook still no one donated... i didnt apealed much though.. maybe i should... i will tell them i´m going to suicide and they will have to live with it for not having helping me...haaa


i believe there are corporations looking what i wrote everyday, i doint think they would post anything though so should not be our people comenting... i guess

i´m not paranoid anymore... my car has got the breaks cut few time ago and i could have died...

its not that i´m saying it was because of the project... but who the fuck knows?

in my honest will i hope if they are reading they can see i´m much more of value live, as i dont want to break any rules.. i just want to play the game...

its 38 dollar for the barrel today...

i really thank your effort and you should know i do the same... i lost 20kg in the last 2 years

i agree if people could dont eat a burger once a month it would be enough for donating... 100 people would do...


Offline Login to see usernames

  • Global Moderator
  • Hero member
  • ****
  • Posts: 3889
Re: New video: Edward Mitchel
« Reply #84 on: August 25, 2015, 19:42:56 pm »
electrotek i think i understood your idea,, thanks you a lot i will give it a try... but if the resistors aren't exactly the same how do i manage to it? if i increase capacitance from one side it should get unbalanced,, ? do you think is possible to build with a single rail power supply?

if i undestood well the final resistance should be 1000 ohm ? for the opamp sensing side? in series with a 20Mohm ? so how the output of the opamp become 50ohm impedance?

Offline Login to see usernames

  • Member
  • **
  • Posts: 126
Re: New video: Edward Mitchel
« Reply #85 on: August 25, 2015, 21:51:06 pm »
electrotek i think i understood your idea,, thanks you a lot i will give it a try... but if the resistors aren't exactly the same how do i manage to it? if i increase capacitance from one side it should get unbalanced,, ? do you think is possible to build with a single rail power supply?

if i undestood well the final resistance should be 1000 ohm ? for the opamp sensing side? in series with a 20Mohm ? so how the output of the opamp become 50ohm impedance?

I'll give you and example of why you have to buy the right equipment.

Say your running an experiment at college in your chemistry class and it needs to be within +/- 0.00005. You take your materials and run to the local market and use their scales which only have a dial on them. What will your instructor say once you tell him what you did and why?

Like I said this fundraiser is going to show you just who your friends truly are.

Shalom,
TGS

« Last Edit: August 25, 2015, 23:54:37 pm by Steve »

Offline Login to see usernames

  • Member
  • **
  • Posts: 222
Re: New video: Edward Mitchel
« Reply #86 on: August 25, 2015, 22:29:36 pm »



Like I said this fundraiser is going to show you just who your friends truly are.

Shalom,
TGS

I think it's time you prove where I ever did say I'm a sworn enemy of yours.  ???

I am in fact willing to help.  If you donate $20 so will I.  How much chance is there that anyone else will also?  MONEY isn't the only form of help.  I'll spend some time and find a schematic and other information.  Even donate for the build.  A BUILD may be his only realistic option.

« Last Edit: August 25, 2015, 23:55:02 pm by Steve »

Online Login to see usernames

  • Administrator
  • Hero member
  • ****
  • Posts: 4621
    • water structure and science
Re: New video: Edward Mitchel
« Reply #87 on: August 25, 2015, 23:55:54 pm »
Please keep it clean Ed.