A green and clean environment is a human right!
General => General Discussion => Topic started by: Dankie on March 25, 2009, 04:19:39 am
-
http://www.zamandayolculuk.com/cetinbal/scalarpotential.htm (good bla bla about scalar stuff )
http://www.unusualresearch.com/scalarbib/scalarbib.htm (plz brg these documents here , I cannot read )
-
dankie i think you will like this i havent read it yet but its by beardon and the only words that caught my eyes so far on the front page is bi directional em waves. scalar stuff
http://www.scribd.com/doc/7162319/Bearden-Tech-Papers-Utilizing-Scalar-Electromagnetics-to-Tap-Vacuum-Energy
-
http://www.hulu.com/watch/64174/knight-rider-classic-give-me-libertyor-give-me-death
-
Time Travel Research Center lol
thanks for the docs
http://www.unusualresearch.com/scalarbib/scalarbib.htm
this one is cool
http://www.unusualresearch.com/scalarbib/djvu/SovietApotential.djvu
dl this to view djvu
http://sourceforge.net/project/showfiles.php?group_id=32953&package_id=78509
-
stans brother has thrown out many bones for us.. you just got to take alot of his causual talk on the wfc and focus on the little keys he gives us.. like he says the reason they use stainless is because it acts like a transistor. he says that and he mentions the silicon content. which is making it a semiconductor in a since? he mentions the creation process is cold rolled and alot of little triangle in the material? i was reading up on transistors and i came across this one..
The bipolar junction transistor (BJT) was the first type of transistor to be mass-produced. Bipolar transistors are so named because they conduct by using both majority and minority carriers. The three terminals of the BJT are named emitter, base and collector. Two p-n junctions exist inside a BJT: the base/emitter junction and base/collector junction. "The [BJT] is useful in amplifiers because the currents at the emitter and collector are controllable by the relatively small base current."[9] In an NPN transistor operating in the active region, the emitter-base junction is forward biased, and electrons are injected into the base region. Because the base is narrow, most of these electrons will diffuse into the reverse-biased base-collector junction and be swept into the collector; perhaps one-hundredth of the electrons will recombine in the base, which is the dominant mechanism in the base current. By controlling the number of electrons that can leave the base, the number of electrons entering the collector can be controlled.[9]
quote
"conduct by using both majority and minority carriers" i think this would be what im speaking of.. holes build up on one side while electrons on the other
"There are two recognized types of charge carriers in semiconductors. One of them is electrons, which carry negative electric charge. It addition, it is convenient to treat the traveling vacancies in the valence-band electron population (holes) as the second type of charge carriers, which carry the positive charge."
THE WORD TRANSISTOR IS A CONTRACTION OF “CURRENT-TRANSFERRING RESIStor
"Bipolar transistors, like diodes, can be made from various semiconductor substances.
Silicon is probably the most common material used."
"Bipolar transistors have two P-N junctions connected together. This is done in either
of two ways: a P-type layer sandwiched between two N-type layers, or an N type
layer between two P-type layers." theres also a I-type i explain that further down the post.
i think the static voltage that is built up in the copper chokes maintain your static potenitals in the exciters that being one side positve with its scalar wave and the other side negative with its counter scalar wave.. then with how my schematic shows the stainless positve hooked to the positve side of the primarys magnetic induction... it is using the positive 49a-49n pulse to gate?
"Zero bias
Suppose that the base isn’t connected to anything, or is at the same potential as the
emitter. This is zero base bias, sometimes simply called zero bias. How much current
will flow through the transistor? What will the milliammeter (mA) show?
The answer is that there will be no current. The meter will register zero.
Recall the discussion of diode behavior from the previous chapter. No current flows
through a P-N junction unless the forward bias is at least equal to the forward breakover
voltage. (For silicon, this is about 0.6 V.) But here, the forward bias is zero. Therefore,
the emitter-base current, often called simply base current and denoted IB, is zero, and
the emitter-base junction does not conduct. This prevents any current from flowing between
the emitter and collector, unless some signal is injected at the base to change the
situation. This signal would have to be of positive polarity and would need to be at least
equal to the forward breakover voltage of the junction.
"Reverse bias
Now imagine that another battery is connected to the base at the point marked “control,”
so that EB is negative with respect to the emitter. What will happen? Will current
flow through the transistor?
The answer is no. The addition of this new battery will cause the emitter-base
(E-B) junction to be reverse-biased. It is assumed that this new battery is not of such
a high voltage that avalanche breakdown takes place at the junction.
A signal might be injected to overcome the reverse-bias battery and the forward
breakover voltage of the E-B junction, but such a signal would have to be of a high, positive
voltage."
how do they make p and n type semiconductors???
what about the I type semiconductor?? have you heard of that one???
A P-type semiconductor (P for Positive) is obtained by carrying out a process of doping, that is adding a certain type of atoms to the semiconductor in order to increase the number of free charge carriers (in this case positive).
An N-type semiconductor (N for Negative) is obtained by carrying out a process of doping, that is, by adding an impurity of valence-five elements to a valence-four semiconductor in order to increase the number of free charge carriers (in this case negative).
An intrinsic semiconductor, also called an undoped semiconductor or i-type semiconductor, is a pure semiconductor without any significant dopant species present. The number of charge carriers is therefore determined by the properties of the material itself instead of the amount of impurities. In intrinsic semiconductors the number of excited electrons and the number of holes are equal: n = p.
the key words n=p negative = positve
so where im trying to go with this is when the plate material is put under a certain type of a electrical stress( extra holes/ or overpoppulated electrons).. being a bidirectional flow pulse, created by stans sync pulse circuit.... the system can electromechanicaly dope the plates itself..
for every action there is an equal and opposite reaction.. its the other half of the equation thats been left out of electric.. the opposite reaction that is happening evenly with emf the even exchange rate happening.. with no oscilation! understand oscillation is making both forces have to switch direction constantly in ac. the sync pulse does nothin like that . it keeps pushing holes one way and electrons the other.. its like knowing how to make ether work like hydraulics.. the alternator is like a electohydraulic pump the chokes are like your hydraulic cylinders.. they hold potential???
a little bit about nickel l http://en.wikipedia.org/wiki/Nickel
"The most common oxidation state of nickel is +2 with several Ni complexes known. It is also thought that a +6 oxidation state may exist, however, this has not been demonstrated conclusively. The unit cell of nickel is a face centered cube with a lattice parameter of 0.352 nm giving a radius of the atom of 0.125 nm"
when they speak of oxidation state they are speaking of positve potential state of the material and It is also thought that a +6 oxidation state may exist, however, this has not been demonstrated conclusively
references
http://en.wikipedia.org/wiki/Minority_carriers
http://en.wikipedia.org/wiki/Transistor#Transistor_as_a_switch
http://en.wikipedia.org/wiki/I-type_semiconductor
outlawstc
-
The conductivity of intrinsic semiconductors can be due to crystal defects or to thermal excitation. In an intrinsic semiconductor the number of electrons in the conduction band is equal to the number of holes in the valence band.
crystal defects
Crystalline solids have a very regular atomic structure: that is, the local positions of atoms with respect to each other are repeated at the atomic scale. These arrangements are called crystal structures, and their study is called crystallography. However, most crystalline materials are not perfect: the regular pattern of atomic arrangement is interrupted by crystal defects. [1] [2] [3] [4]. The various types of defects are enumerated here.
# 1 Point defects
# 2 Line defects
# 3 Planar defects
# 4 Bulk defects
Also amorphous solids may contain defects. These are naturally somewhat hard to define, but sometimes their nature can be quite easily understood. For instance, in ideally bonded amorphous silica all Si atoms have 4 bonds to O atoms and all O atoms have 2 bonds to Si atom. Thus e.g. an O atom with only one Si bond (a dangling bond) can be considered a defect in silica. [7]
http://en.wikipedia.org/wiki/Crystal_defects
An amorphous solid is a solid in which there is no long-range order of the positions of the atoms. (Solids in which there is long-range atomic order are called crystalline solids or morphous). Most classes of solid materials can be found or prepared in an amorphous form. For instance, common window glass is an amorphous solid, many polymers (such as polystyrene) are amorphous, and even foods such as cotton candy are amorphous solids.
http://en.wikipedia.org/wiki/Amorphous
Photon polarization
Photon polarization is the quantum mechanical description of the classical polarized sinusoidal plane electromagnetic wave. Individual photons are completely polarized. Their polarization state can be elliptical, circular, or linear. http://en.wikipedia.org/wiki/Photon_polarization
The piezoresistive effect
describes the changing electrical resistance of a material due to applied mechanical stress. The piezoresistive effect differs from the piezoelectric effect. In contrast to the piezoelectric effect, the piezoresistive effect only causes a change in resistance; it does not produce an electric potential.
Piezoresistive effect in silicon
The resistance of silicon changes not only due to the stress dependent change of geometry, but also due to the stress dependent resistivity of the material. This results in gauge factors two orders of magnitudes larger than those observed in metals (Smith 1954). The resistance of n-conducting silicon mainly changes due to a shift of the three different conducting valley pairs. The shifting causes a redistribution of the carriers between valleys with different mobilities. This results in varying mobilities dependent on the direction of current flow. A minor effect is due to the effective mass change related to changing shapes of the valleys. In p-conducting silicon the phenomena are more complex and also result in mass changes and hole transfer.
http://en.wikipedia.org/wiki/Piezoresistive_effect
-
-
awesome video, I always enjoy these, thanks for posting it
-
no problem im just trying to point out some observations.. like there molding process they start to stretch the steel while its still hot right? whats that doing to the silicon inside??? then when its cooled off they still roll it out some more in a cold rolled process, whats that doing to the silicon? also they say that it forms a oxidized layer in presence of oxygen do to the oxidized chrome layer it develeops??. think on that.
The chromium forms a passivation layer of chromium(III) oxide (Cr2O3) when exposed to oxygen. The layer is too thin to be visible, and the metal remains lustrous.
-
no problem im just trying to point out some observations.. like there molding process they start to stretch the steel while its still hot right? whats that doing to the silicon inside??? then when its cooled off they still roll it out some more in a cold rolled process, whats that doing to the silicon? also they say that it forms a oxidized layer in presence of oxygen do to the oxidized chrome layer it develeops??. think on that.
The chromium forms a passivation layer of chromium(III) oxide (Cr2O3) when exposed to oxygen. The layer is too thin to be visible, and the metal remains lustrous.
W/E the way s/s is done , we have no power over it . We will test with the s/s we have , 304 material .
-
The piezoresistive effect
describes the changing electrical resistance of a material due to applied mechanical stress. The piezoresistive effect differs from the piezoelectric effect. In contrast to the piezoelectric effect, the piezoresistive effect only causes a change in resistance; it does not produce an electric potential.
Piezoresistive effect in silicon
The resistance of silicon changes not only due to the stress dependent change of geometry, but also due to the stress dependent resistivity of the material. This results in gauge factors two orders of magnitudes larger than those observed in metals (Smith 1954). The resistance of n-conducting silicon mainly changes due to a shift of the three different conducting valley pairs. The shifting causes a redistribution of the carriers between valleys with different mobilities. This results in varying mobilities dependent on the direction of current flow. A minor effect is due to the effective mass change related to changing shapes of the valleys. In p-conducting silicon the phenomena are more complex and also result in mass changes and hole transfer.
http://en.wikipedia.org/wiki/Piezoresistive_effect
it makes the plates/ or tubes act like a diodes i think.. you know how a diode has a p-type (positve) and n-type(negative) well what if the silicon goes through the piezoresistive effect and it dopes itself with the force of pure opposite potentials one directional flow emf. that would use high potential vacuum to do that? stan said somthin about alignment due to the high potential but maybe he ment this.. i mean if they get doped like that (under intense electrical stress) in any normal circumstance +1000 and -1000 potential would want to cause current in a diode right? the current is not flowing because its stuck on the core.. it has a mutual inductance to its fello bifilar. since we are displacing on a 1 to 1 ratio.. 1 hole for one electron.. they are happy on the core..which i think would make it act like a doped capacitor??? i cant see over 3000 volts going to the water.. i think stan may get 40kv with the taperd cavity. due to geometrical
-
Now that I read chapter 10 and 5 , its clear to me that its indeed a bifilar like you say ... I'm reading the part on the *miniature sun* , this is energy coming from the vacuum , hence truely opposing waves .
but becomes *more positive* because of the diode , chapter 10 is really informative .
-
fellas we are stumbling into the basic of quantum mechanics!! i know if you guys really know what stan does to get the electron particle generator to work you know what im talking about.. stan hints on it a little bit. stan was saying that you can bond atoms that have never been bonded before because your able to strip enough electrons to make it happen.. the electron particle generator.. has a magnetic gas inside it.. magnetic gas doesnt exist at ambient tempatures.. stan quantim mechnicaly made it.. he used his vic with electrodes present by iron powder and argon gas. when placed under high voltage he would pluck electrons from argon and was able to get metal ions to bond.metal ions all spin the same way and they produce a emf.. stan is also the inventor of man made magnetic gas.. chemistry bonds occur between 1-10 volts..
this video is a must watch..
http://video.google.com/videoplay?docid=1501838765715417418&ei=rSzMSZWvKYKwrAKB_-i-AQ&q=photons&hl=en
outlawstc
-
Organic light-emitting diode
http://en.wikipedia.org/wiki/Organic_light-emitting_diode
-
pretend you have a clock one hand has a hole at the end (light) and the other has a electron. these arms are both at 12 oclock.. when a displacement of electrons starts to take place the clock hands move bidirectional.. every time the clock hands cross paths they exchange a hole for an electron.. now really really focus on this in a realitivty manner(time) if your differential displacements are balanced then both clock hands are traveling bidirectional at the same rotation speed so they are meeting at 12 and 6 oclock every rotation. if theres a difference in potential then you will not be at 12 oclock,, you will create another rotation to occur thats uneeded.. like if the clock hand thats starts at 12 and is going counter clock wise was being forced with more potential.. it would be making that clock hand travel at a faster speed.. so if its going faster then you get your exchanges happening at different times.. like 12 then 5 then 10.. and it would be all off.. but if your in resonance your trade should be at like 12, 6, 12 ,6, 12, 6........ thats resonance in more detail?? so when you get that understood.
now think on this.. the earth.. can tell us so much more then we tend to notice..
we are on this sphere right??/.. what is it surrounded by on all sides? space!!! what is space?? vacuum!!!
well if its a vacuum what keeps this planet from falling apart??? there must be a force pushing down! well what force could be pushing on us??? gravity.. well whats creating that gravity? potential.. ..
invision all the layers of the atmosphere.. and consider the very top bordering space you have one electrode there and earth is the other.. what is happening between them 2 potentials? whats causing the ionosphere? all elements in that region are being ionized to positive energy state... ozone(higher energy state oxy gas) from radiant light and most likely the vacuum state of space potential!!!
-
fellas we are stumbling into the basic of quantum mechanics!! i know if you guys really know what stan does to get the electron particle generator to work you know what im talking about.. stan hints on it a little bit. stan was saying that you can bond atoms that have never been bonded before because your able to strip enough electrons to make it happen.. the electron particle generator.. has a magnetic gas inside it.. magnetic gas doesnt exist at ambient tempatures.. stan quantim mechnicaly made it.. he used his vic with electrodes present by iron powder and argon gas. when placed under high voltage he would pluck electrons from argon and was able to get metal ions to bond.metal ions all spin the same way and they produce a emf.. stan is also the inventor of man made magnetic gas.. chemistry bonds occur between 1-10 volts..
yeah he said that, amazing stuff and what he explains makes perfectly sense, but is it is reality? hope we'll find out.
-
yeah he said that, amazing stuff and what he explains makes perfectly sense, but is it is reality? hope we'll find out.
its real and it will work.. are atmosphere proves it everyday..
-
What aspect of the atmosphere proves "molecule creation from scratch"?
-
the way im relating it to the atomosphere is simple..
"The Earth's atmosphere (or air) is a layer of gases surrounding the planet Earth that is retained by the Earth's gravity. "
why are they being retained? they say gravity and make it sound like only one force is happening.. but theres 2.. for every action there is an equal and opposite reaction right? and they trick us with the what goes up must come down. as if thats the result of newtons law.. because its logical and makes sence but its only half the equation from a variable potential aspect when it comes to motion.. potential is not defined well enough when it come to being related to gravity.. and how charges (by population and energy state) highly relate to ones position in the atmosphere. the pulling of earth, and the pushing of space.. which depends on objects potential.. we as humans are considered neutrals and are heavy and big in size when it comes to particle mass so we tend to be attracted to the positive charge just like in a atom.. just like positve hydrogen clings to carbon(neutral).. EVERYTHING relates lol think
Ionosphere
The part of the atmosphere that is ionized by solar radiation stretches from 50 to 1,000 km (31 to 620 mi; 160,000 to 3,300,000 ft) and typically overlaps both the exosphere and the thermosphere. It plays an important part in atmospheric electricity and forms the inner edge of the magnetosphere. Because of its charged particles, it has practical importance because it influences, for example, radio propagation on the Earth. It is responsible for auroras.
outlawstc
-
stan knew how the universe works..
-
stan knew how the universe works..
Yes sir , Stan was a different kind of engineer .
He was an observer of nature , he simply understood it just like that mysterious ED guy .
Stan was engineering *matter* , this is what Bearden was talking about , *precursor engineering* .
-
einstiens equation fits perfect for this observation..
E(total energy) = mass energy which is also the electron count of a atom?? x the constant speed of light squared..
the real kicker is light squared.. why is it squared? could it be to account for the opposite electron force flow that is happening in opposite direction? and the square is to account for the net force of energy E? which can only be determined by electron count of the matter.. which can determine how much light energy that is able to be abosrbed in that specific object.. you would think einstien would know this if its true?
remember whats going on with oxygen when its hit with light.. it puts electrons out in further orbits.. the mass is taking the positve hole (light) energy and it is trying to exhange its electron for it.. just because that electron is going into further orbit doesnt mean the nucleus of the atom is the only force pushing on the electron. but the light vacuum force is also pulling it?
-
why is it squared?
a lot of the time you don't even need formulas to solve physics problems, you just look at the units.
Energy = [J] Joules
[J] = [N-m]
[N] = [kg-m/s^2]
Energy = [kg-m/s^2][m] = [kg-m^2/s^2] = [kg][m/s]^2
Energy = mass * velocity^2
The velocity of what? Lets take a guess at light? I'm sure it was one of the more significant velocities in the general subject area, apparently the big E had dreams about photons...
I'd say figuring out the formula was the easy part, proving it was light would have been the fun part.
-
Energy = [kg-m/s^2][m] = [kg-m^2/s^2] = [kg][m/s]^2
Energy = mass * velocity^2
so the velocity squared is light(hole) velocity and and electron velocity right???
-
Outlaw , plz do not get carried away .
I prefer when you end your sentences without a ?
Waiting for our approval is not gonna happen , find good evidence and confirm us .
-
http://video.google.com/videoplay?docid=1501838765715417418&ei=rSzMSZWvKYKwrAKB_-i-AQ&q=photons&hl=en
tell me what u think of this video dankie
-
c is the viscosity of spacetime :)
and light travels on it without resistance
-
http://en.wikipedia.org/wiki/Quantum_electrodynamics
http://video.google.com/videoplay?docid=-5604842186235091737&hl=en
-
qed is cool, esp. made cool by feynman, buy or dl his little book about qed, there are no hieroglyphs in it. 8)
ever heard of this experiment:
http://en.wikipedia.org/wiki/G%C3%BCnter_Nimtz
-
ok have a new analogy.. we have the nortern hemisphere and the southern hemisphere.. the equator is the middle between poles.. its the line that divides the dominance in charge for the planet.. the planet is a dipole.. so there is a build up of hole(light potential) (positive charge) at the north pole, while theres a density of electrons on the south pole.. the circulation of these charges to make them seperate is being cause by the sun.. 24/7 exchanging holes and electrons caused by the suns constant reaction of displacment.. the meeting of both potentials of earth is the equator.. does anyone know what occurs at the equator? trade winds.. well how can wind trade? the only thing wind can exchange is pressure's.. so the north side of the planet is constantly trying to go into a vacuum state but the other hemispere is wanting to build pressure ? and they are trying to build up at the same time in opposite states.. so they created trade winds at 0. trading vacuum for pressure. notice in the pic on the site how the trade winds are flowing in the same direction. just like what will happen with the scalar waves across the cell. notice that a hurricane in the northern hemisphere rotates clockwise while one in the southern rotates counter clockwise but why? because they are 180 out from each other.. now picture them trade winds not as wind pressure but as a build up of electrons as a high pressure and the positive as a low pressure.. building up evenly..in potential.. volts is seperating light from electrons.. newtons law for every action there is an equal and opposite reaction.. a action is a force.. so for every force there a equal and opposite force? (light(photons) force and electrons force)?? electrons are like air.. holes is missing air.. state of vacuum..
so if you want to know if current exist in this system.. i say none.. for one reason.. law of attraction.. those seperated charges next to each other on a magnetic core will appear neutral in a sence.. and in order for current you need a difference.. so instead of creating current you get the skin effect on the plate which apear neutral in charge the step up pulse is like spinning a mary go round.. little poteential push then the next ones stronger and fast.. like it keeps trying to make the electron spin faster but the g force of spinning faster throws it into further out orbits. ...until it is less attracted to the atom and another force plucks it.??? my question can be answer and my statements can be crooked.. but boy do i let my imagination run wild. and it will only find truth while in search in what we call time.
outlawstc
-
http://orgoneproducts.org/blog/using-sound-to-tune-reality-phase-conjunction-time-reversed-sound-waves/
From Patrick J Kelly
Incredibly fascinating , simply incredible fopr me to stumble upon this at this moment ...
Sounds familiar to The Watchmen ?
You bet ...
-
I started from the premise that it was conceivable to alter normal three dimensional reality through a process which I now call ‘tuned intent’. While at the time I didn’t understand the mechanism for the process, and still can’t provide its full mathematics, nevertheless, I pursued the premise, gradually understanding much of the engineering rules supporting it, and eventually made it workable.
From my research, I postulated a model for the composition of reality which confirmed my premise. This model takes into account two vectors: an E-field (electric charge), and an H-field (magnetism). Although these two vectors tend to have separate functions, it is the resultant vector between them that tends to describe our reality as we know and experience it.
Experimentation showed the electric vector to be the Summed Scaler Components that represents energy-as-information, while the magnetic vector locks this energy-as-information into a mode that renders it to us as our 3-dimensional reality.
Included as part of the magnetic vector are the gravitational field effects, as well as mass related effects of the spinning earth and its resultant fields.
What does this mean in a practical sense? If and when you are clever enough to locally cancel the magnetic and related components, while devising a way of tuning into the “energy-as-information”, then with a combination of this tuning plus your own “intent”; (or desire/will), you can affect that which gives identity to any reality.
By careful tuning you can achieve a resonance which allows you to modify that reality. Working with this simple premise and very minute amounts of normal electromagnetic (electricity), one can, for example, detect and analyze biological conditions in humans and animals, as well as the various patterns and energies that make up a farmer’s fields and crops, the weather patterns, and the telluric or earth energies at any given location.
Equally important, one can make basic and fundamental modifications to these various realities in their patterns of energy-as-information, which then reflects back into our normal 3-dimensional world.
Without elaborating the mechanics of how we accomplish this, I can state that it is mostly done by working with charges, circuits, and fields in which you convince, as it were, electron flow not to occur while you are doing this type of tuning with intent.
By using the same approach, one can collect the energy field or aura surrounding a subject, perform analysis in the form of FFTs (fast Fourier transforms), display it to a computer screen, and store the information to a hard or floppy disk drive for later evaluation.
THE USE OF PHASE CONJUGATION (TIME REVERSED) SIGNALS IN THE BETAR AUDIO SYSTEM TO ACCOMPLISH RELEASE OF DEEP, LOCKED-IN STRESS OF THE HUMAN BODY
Time reversal theory has decades of distinguished and important usage in physics, although most engineers in fields outside nonlinear optics have little or no appreciation for the concept (a).
However, the phase conjugated (time reversed) wave is a general solution to the wave equation and applies to waves of all types (b). It has been accomplished with sound waves (c), for example, although little engineering use has been made of the effect except in the field of nonlinear optics, where it is an essential part of the paradigm.(d).
That phase conjugation (PC) waves can have beneficial effects on the human body has been addressed by Tom Bearden (e). Prestigious French scientists demonstrated that advanced electromagnetic machines, constructed by Antoine Priore using complex multiple signals of radar frequencies mixed and phase conjugated in a rotating plasma, exhibit significant healing characteristics, even against terminal cancers and leukemias (f).
Our purpose, however, in the use of phase conjugate sound in the BETAR tm is not to accomplish biological healing, but only the release and relief of embedded stresses in the body.
It is well-known in medical science that the prevalence of physical stress hampers the body’s immune system and healing functions. Therefore, the release of stress, particularly chronic stresses, can have beneficial effects by enabling the body to relax and recover the normal level of its own natural and vital immune and healing capabilities. Other than relaxation through stress releases, no other claim for phase conjugated sound is made or envisioned.
BACKGROUND
Western scientists discovered time-reversed EM (electro-magnetic) waves in the available Soviet nonlinear optics literature in the early 1970’s. Prior to that time, no one in the West suspected that macroscopic, extensive time- reversed waves could easily be made and utilized.
A means of amplifying the time-reversed wave by four wave mixing was quickly discovered (g). This mixing is a universal mechanism and easily provided for in any nonlinear dielectric system in which multiple-wave inputs are mixed. It is as true of sound as it is of any other electromagnetic waves.
The simplest case will be explained briefly. Into a dielectric medium, two sinewave oscillations are introduced antiparallel, or with components that are antiparallel, so that their respective phases are 180 degrees apart.
The nonlinear medium acts as a modulator, and locks the two waves together into a single wave with zero translation resultants, but with rhythmic stress oscillations (rhythmic compressions and rarefactions, or, simply put, rhythmic squeezes and releases) in the material medium. In phase conjugation optics, this stress wave is referred to as the pump wave.
The pump wave is not, however, the rhythmic variation of the stress: stress and relax: stress and relax: and so on, through the dielectric medium. Precisely, it is a wave of potential, a scalar wave, throughout the medium, rather than a wave of translation forces (rather than a vector wave). In the ideal situation, it is also a standing wave, and thus a standing scalar wave.
The medium together with its standing pump wave is referred to as a pumped phase conjgate mirror (PPCM). A PPCM has certain very significant characteristics, the chief one being the capability of acting as an amplifier for producing an amplified phase conjugate (time-reversed) wave. If a third wave is now introduced into the PPCM, an amplified time-reversed replica of that third wave will be output by the medium itself.
In other words, the embedded, bound stresses of the medium (due in this case to the presence of the stressing pump wave) are released by this emitted and amplified phase conjugate wave.
The entire system acts much as a triode tube: the third input signal is the grid signal, and the pump wave is the energy input into the cathode. The input of the grid signal results in an amplified signal appearing at the plate in this instance, departing the system and radiating away.
In the situation of continuous ‘pumping’; of the medium, the initiating signal must be continually applied. If the pump wave is only temporarily applied, then a single initiation of the grid signal will cause emission of a single amplified phase conjugate replica, which stress relieves the medium.
Thus with four-wave mixing and pumped phase conjugate reflection, bound, locked in stresses in a dielectric medium can be relieved and caused to radiate away as time-reversed waves. It is accented again that these characteristics and functions are universal to all waves and nonlinear media for them, not just to electromagnetic waves.
APPLICATION TO THE HUMAN BODY
The application to the human body is straightforward. Since the body easily contains audible sound wavelengths, standing sonic pump waves can occur in the body tissues by properly phased, opposing sound waves, or sound waves with opposing or phase shifted components.
Body tissues form a highly nonlinear dielectric and modulator, locking together the opposing components into a standing scalar sound wave. Inputs of opposing complex sound waves produce a variety (a spectrum) of standing scalar sound waves in body tissues.
This standing scalar wave spectrum completely penetrates with a minimum of input power, and none of the body tissues are completely omitted from possessing an internal standing wave.
The body becomes a pumped phase conjugate mirror. In addition, other inputs which do not zero-sum at the moment are continually occurring across the spectrum, providing a constant barrage of grid inputs to the body PPCM/triode, scaning the entire signal spectrum.
By this constant and pulsating grid signal input, the body is continually stress relieved, even from its deepest and finest tissue levels by the amplified phase conjugate replica sound radiation. The effect poses enormous importance: excess bodily stress of any and all kinds is continually scavenged from the cells, tissues, vessels, organs, bones, the entire body; and is radiated away as harmless, complex time-reversed sound waves.
Further, only excess stress is scavenged and relieved. A natural control is present, since the scavenging (PPCM) effect only exists when and where stress exists. Hence, no damage or harmful effect is done to tissues since the power levels are kept below the intensity that would be necessary for physical tearing and tissue damage.
The mechanism is one hundred percent efficient. It specifically targets internal stress, contacts the deepest and most minute levels of the body, and insures an automatic self regulation mechanism to prevent any harm to the tissues.
THE BETAR STRESS REDUCTION METHOD AND SYSTEM
As can be readily seen by the first two drawings below (1a and 1b), placement of the transducers above and below the bed produces the four-wave amplified phase conjugate sound mirror (PPCM).
This mirror effect is achieved by the use of unique audio amplifiers and components with particular time-shifting characteristics. Furthermore, the pumping of the same signal through special transducers using particular materials and their placement in a designed relationship to the body being pumped are necessary for the phase conjugate effect and its inherent stress- relieving phenomena.
To further enhance the PPCM phenomena and effect, particular audio frequencies and pulses in the sub-audible and audible range are mixed throughout the BETAR system.
They consist of both sine waves and their odd-order harmonics, and are sub- audible in relation to the music heard on the BETAR system.
The amplifiers used in the system are unique also; for it is necessary to have a bandpass of frequencies that are well above and below what is considered the hearing range of a normal human being.
The physical properties of living, biological structures such as the human body behave as a semiconductor material. For some of the body’s elemental composition conducts due to minute amounts of metallic compounds and elements. Other components are nonconductors, a dielectric by their nature, such as the various salts, etc.
The commonly accepted view is that a body has relatively high (26K ohms or more) resistance, certain capacitances,inductances, and conductances. Thus it acts like a semiconductor, or even possibly a dielectric.
The human body stores patterns of energy-as-information in the semi-conductor matrix which constitutes its matter. At different times, due to such changes as the amount of conducting materials, the subject may be more or less inclined to store more of these patterns of energy-as-information from his environment.
The BETAR and its transducers are physically designed to access these patterns-of-energy -as-information. The subject lays down above the transducers. The BETAR initiates and processes the sound in a phase-conjugate mode.
This normal translation of electromagnetic energy into sound vibration and pulsed magnetic fields induces a relaxation response in the body.
Besides these purely vibrational effects of the focused sound and vibrational components, the magnetic field generated by the coil component of the transducer interacts with the semiconductor materials sandwiched in the sound lens. Experimentally, we are showing an accessing of the patterns of energy- as-information as they are stored in the human subject.
The addition of the detector system mentioned at the beginning of page 2, provides the possibility for qualified medical personel, physicians, psychiatrists, as well as psychologists, in developing a system of understanding for the interpretation of the modifications of energy that the body undergoes during the BETAR experience.
Source- with Footnotes
-
very interesting dankie.. where can i buy one of these body resonators?. sounds relaxing.. check out this definition..
Spin polarization is the degree to which the spin, i.e. the intrinsic angular momentum of elementary particles, is aligned with a given direction. This property may pertain to the spin, hence to the magnetic moment, of conduction electrons in ferromagnetic metals, such as iron, giving rise to spin polarized currents. It may also pertain to beams of particles, produced for particular aims, such as polarized neutron scattering or muon spin spectroscopy. Spin polarization of electrons or of nuclei, often called simply magnetization, is also produced by the application of a magnetic field, thanks to the Curie law and it is used to produce an induction signal in Electron spin resonance (ESR or EPR) and in Nuclear magnetic resonance (NMR).
Spin polarization is also important for spintronics, a branch of electronics. Magnetic semiconductors are being researched as possible spintronics materials.
The spin of free electrons is measured either by a LEED image from a clean wolfram-crystal (SPLEED) or by an electron microscope composed purely of electrostatic lenses and a gold foil as a sample. Back scattered electrons are decelerated by annular optics and focused onto a ring shaped electron mulitplier at about 15°. The position on the ring is recorded. This whole device is called a Mott-detector. Depending on their spin the electrons have the chance to hit the ring at different positions. 1% of the electrons are scattered in the foil. Of these 1% are collected by the detector and then about 30% of the electrons hit the detector at the wrong position. Both devices work due to spin orbit coupling.
-
a little thing i wrote up. i call it polarity vice versa.
for every question theres a answer, for every answer theres a question there the same in relation but theres two differences involved to get either action , distortion and clarity. when you are born, distortion of all reality is at its highest. its the simple times of life, the begining.. the mind is not full of mixed signals created from experiance that happens in time.. its blind. as we go through life we find clarity in many things and it gives us a sense of enlightenment and or a sense of troubles... distortions and clarity can create gain working in opposition to each other. the gain is wisdom and the truth. one step forward towards the question. brings you one step closer to the truth. hey it may be a bumpy road but its builds character. what shows the truth? reflection. they make us walk in circles now days nothin but distortion. some of us have intuition gods people.. some have ignorance the devils infantry. there is so much truth in this .if you dont understand it read it again and again. since each time you read it, it shall bring you one step closer. to the truth. stan meyers work and the worlds based off it..
i hope you like my riddle.
outlawstc
-
that little riddle explains how it works. energy exist in many forms and theres allways difference.. but the difference brings on attraction in natural law. they pull on each other.. thats where the new net gain comes from.. there a team together... the world has been so distorted that are differences created hate/ repel, such as racist.. why??? because we are being distorted everyday by many encounters. by what? standards, regulation and so on. so much turbulance... you see everthing applys to these rules when it comes to action/ life.. but they all take time.. some winds are faster but thats because the differences are higher(excitment). some winds are slow they are lower differences (bordem). turbulance comes from imbalance. and while all this is happening you are given one point of observation. the body. relativity is understanding this????
outlawstc
-
what do you see in this picture?
-
ok i see what this pic is saying.. so i look up the painter biography and here are some clips.
his name is Isaac Abrams
He begins his work with a series of loosely conceived juxtapositions and then discovers in those juxtapositions the metaphysical and cosmic concepts which are so often expressed in his art.
His works are sudden leaps into unknown spaces, into free-floating gravityless existences, where angels and demons, concepts and conceptions appear and disappear, where paradoxes proliferate and where each viewing of the painting may bring to the viewer a new and different cross combination of the ele- ments within.
His intentions are to create a painting viewable at any distance from inches to yards or dozens of yards; a piece having a vital life which is not dependent on a single point of view or a single conception of what was within.
A Jungian psychoanalyst, for example, has said that Mr. Abrams' works relate to certain archetypical experiences which are often seen in the dreams and fantasies of her patients; a physicist sees various assertions of the latest thinking about the gravitational effects of large bodies on space, time and the "shape" of the universe.
Mr. Abrams feels that he is an open channel. His work is not limited by his own knowledge. He is open to third forces; the first being himself, the second being the painting; and the third being the forces of unconscious cross-connection of all thoughts into one great mind. Having experienced this unity of all thought forms into the one thought form, Mr. Abrams is capable of reaching into the many areas of human experience, to snatch from the pool of the collective consciousness of all minds, extraordinarily acute perceptions.
http://www.rogallery.com/abrams_isaac/abrams-bio.html
outlawstc
-
i added some more to my little riddle...
For every question there’s an answer, for every answer there’s a question there the same in relation but there are two differences involved to get action, distortion and clarity. When you are born, distortion of all reality is at its highest. Its simple times of life, the beginning... the mind is not full of mixed signals created from experience that happens in time... its blind. As we go through life we find clarity in many things and it gives us a sense of enlightenment and or a sense of troubles... distortions and clarity can create gain working in opposition to each other. The gain is wisdom and the truth. One step forward towards the question, brings you one step closer to the truth. Hey it may be a bumpy road but its builds character. What shows the truth? Reflection. They make us walk in circles now days, surrounded by nothing but distortion. Some of us have intuition gods people... some have ignorance the devils infantry. There is so much truth in this .if you don’t understand it read it again and again. Since each time you read it, it shall bring you one step closer. To the truth, one step closer to intuitive instincts and also take you one step away from ignorance at the same time hey its duality vice versa!! life has to many variables and complexities to predict and prepare ahead of the time in most cases.. so the only thing you can do is BE prepare for the ride 24/7.. and in the present time of relativity it seems like it might get ruff. so hold on tight and dont shit yourself. the truth is im as real as they come these days haha.. what does your intuition say? i say bitch dont judge me see its vice versa lol
thats the theory of relativity in my words.. and stans tech works off of the vice versa duality in nature..
that is the most important thing i think i will ever be able to write on paper in my life when it comes to lifes actions in there simplest forms that creates our complex life. from our perspective. its the dualitys of multiple forces that paint the canvas.. stan set up a controlled environment for specific duality forces.
cheers
outlawstc
-
in this drawing i made.. it gives a example on a atomic level how they determine a cycle.. also under it i give an example of what beardon is talking about when he says pumping the dipole.. read my quote as a whole understand it.. it sheds light on everything... when you pump a dipole its sending light one way and electrons the other way.. when being done under rectified emf it can cause displacement in things.. i think depending on what side of the equator your on determines your antigravity force of use for purpulsion (light or electrons).. when it comes to levitation. think about it.. if the south pole is negative.. why do you think theres huge tropical rain forest.. there negative land charge of the south pole pulls in more light.. it gives the south hemisphere more vividness in colors.. look at how colorful there plants and animals are down there they are getting more light saturation.. also the land probly gets a positve skin effect which might saturate there air with more carbon then the north. while the north pole we build up with electrons on this side because are positve land north hemisphere attracts them.we get a negative skin effect.. causing dryness. cold winters. less color.. negativity. then you look at the southern hemisphere.. how often do you hear of any conflict down there? lol
outlawstc
-
That pic I recognize from mr John Keely´s work. Read him, he is perhaps the best experimental physicist that ever existed, also check out keelytech.com - Keely was a giant and www.witts.ws are following in his footsteps with their work on crystals and hf dissonance etc. I believe witts i the best group out there, by far. Hopefully they will get some funding from people and get stronger, Sir Timothy Thrapp has been persecuted for 20 years, simply because he is the best one I believe.
-
That pic I recognize from mr John Keely´s work. Read him, he is perhaps the best experimental physicist that ever existed, also check out keelytech.com - Keely was a giant and www.witts.ws are following in his footsteps with their work on crystals and hf dissonance etc. I believe witts i the best group out there, by far. Hopefully they will get some funding from people and get stronger, Sir Timothy Thrapp has been persecuted for 20 years, simply because he is the best one I believe.
Interresting comments about how storms are an expression of this energy form .
-
i think im a little off on the idea there... im seeing the eye of a hurricane kinda like the proton? the top platu of the storm is the north pole side while the ground contact side is the south pole... then i imagine that they pancake with north (the top of the storm facing one way and the south pole ground is all face the opposite way being 180 out.. take a piece of paper and draw a line about 1/2 off one edge parallel with the edge.. label one N ans the other S then if you draw a rotation direction by both N and S you will see when you round the paper to where north and south meet the rotation is still the same.. but they are 180 out phases..