by lookin at my pic i drew of tube with traveling wave guide(labeled in its time seqence of events P!,P2,and P3.. im thinkin water makes 1 oscillation every 5 sequence hits.. so if we had 3 phases that are putting there own cycle of 500 hertz that are 120 out of phase from each other.. we know there peaks hit at different time periods.. so we are gettin 1500 peak voltages with the 500hz 3 phase combined in 1 second at 5000rpm.. but what if we decided to use only a positive leg on one, both on another, and the negative on the last phase.. since we have three phases peaking at seperate individual time periods. it will create unipolar oscillation.. and potential dwell time 0v.. so im thinkin 5 hits oscillates water 1hertz and if thats tru then when you hit water with the 1500hertz you could divide it by 5 and see that the water may be oscillating at 300 hertz Acoustic---------- 750 rpm will give 45hertz acuostics in water.. and 225 hertz electrical stress.. so do you see what i mean by dynamic and static variables? and notice they both increase and decrease proportional to the rpms of the alternator.. either u need 3 vic's 6-1 or some type of switching logic for the output.... i dont know it sounds logical to me..

outlawstc