I wrote this last night before the cable went down and kicked my computer offline. Now I'll edit it a bit.
Wow, "enlightening" excellent science. You have studied hard.
I have to ask have you tried, experimented with the laser or is it just of your understanding of the spectrum and these particular atoms structures. (you said you have tried)
Just for the sake of practical use I am as well as most here are more than willing to put this to use if I may speak for others. Sorry if I speak for others but I'm thrilled!
To be put to use you suggested the "argon flouride laser @ 193nm" the reason I'm asking is obvious as I am preparing to get a laser and as I think again we don't want to waste hard earned cash in the process. Great science on the other hand is no waste in my book and has to be experienced. As to the HV ionization are we speaking of more than 1 method possible? I mean a HV laser at 193nm or maybe the neon transformer or microwave transformer and 2 electrodes. Or both? Would these have almost the same outcome? What are your takes on the low voltage cheaper lasers verses higher voltage. Is the light coming from the laser any different as (HV or LV) it would be the same spectrum and low voltage lasers appear cheaper. Or will the gas feel the static nature of high voltage more. You may have answered the HV but I would just like to hear it again
. Now what about power of the laser as it appears at a 80mw range or more this could destroy the vessel we may use in production (a plastic housing). Should it have a focus length on it to bring it to a point or? The lower power what maybe 15-40mw would suffice do you think? James I appreciate your input, thank you.
I also read about the cones H2power it definately is worth trying as a step up in energy maybe produced as it gets to the point of the cone or tip if I remember right. Also there was a video on one site somewhere. The cones that they used appeared to me 2 or 3" wide as well as 2-3" tall and it looked good a ton of gas produced. That sparked my interests also.
These parts just don't come around so easy, one thing I can think of is food grade funnels as they should be made from 316l maybe. Some small funnels and you can make 2 different style cones from them small tight ones from the spout and larger ones from the body. What would be the gage of the stainless on the food funnels or cones?
I saw some muffler pipes called resonator tubes I thought to be of interest. But maybe to large (over 3" wide), they had what appeared to be a round pressed out larger cavity 3.5 or 4" and short tubess on the ends. Maybe cut in half would be nice if there was a matching size to put inside each other.
Sometimes these videos are not what they appear to be, they don't show all the pieces of the system. It seems that finally items like vacuum are becoming quite apparent as it does wonders and allows the use of HV and electrical emmissions in cells that may ignite if the vacuum was not there to prevent this. These high voltage circuits need protection, it appears if the vacuum fails then the HV needs to turn off. that seems easy.
oh well hope to hear more on lasers or other HV in this section.
John
