Ionizationx: a clean environment is a human right!
Engines On Water => 100% Hydrogen running engines => Topic started by: nealward on October 09, 2018, 17:11:40 pm
-
I removed the videos, because x blade is a asshole
-
I removed the video, because x blade is an asshole !
-
Hi Neal,
Which one is yours?
:)
cheers
-
Hello there Steve.
They are all mine.
-
any selfsustaining system?
-
No not yet , These were brute force, but it was only to learn how to run engines on hho, Mixture rates, volume etc A huge learning experience.
i can agree on that my self.
Did 4 diff engines myself.
It was great fun ad well.
-
Hello there Steve.
They are all mine.
Hi Neal.
Since hho is implosive, is your timing normal, or do you set it somewhere around BDC? Is the combustion in the cylinder or the manifold?
__________
Grunge (grudge)
-
Do not play with the timing, get the flame speed correct and it runs exactly the same as gasoline. The valve overlap is a problem. Engines with an EGR are better candidates.
-
Hello Neal.
Nice to see when people does it the same way that Meyer told us.
We need to adjust the burn rate not to change the whole motor.
Cheers.
-
Do not play with the timing, get the flame speed correct and it runs exactly the same as gasoline. The valve overlap is a problem. Engines with an EGR are better candidates.
I see you have a Y connector with an extra hose. Is that from the exhaust? (Or compressed air.) Is that how you adjust the flow rate?
-
Which one are you referring to ?
-
The next to last video.
-
Ah yes the weedeater. yes the second line is ambient air. It is to dilute the hho to burn slower.
-
Very good. Thanks.
-
Very interesting videos! Good inspiration for me!
Thanks a lot Neal
-
Just trying to stir up the interest again. We need to continue the research.............
-
Nealward why dont you borrow the Ronnie Taalker cell and run on it... ;-)
-
Ronnie Talker ??
Fuck Off.
Ronnie is a very close friend of mine, who I know first hand is not a Talker. This is why this research goes no where. Assholes like you. I will take down my posts now. ignorant fucks like you are the problem.
-
Liars like your "close friend" (maybe in the bed) that makes it fun, lol
I am not doubting about your work but this guy filled the boards of the pure b$hit and nonsense and you know that.
You are hidding it because you and your friend are still interested in scrap some money by your stupid webshop.
-
You are a complete asshole. No wonder why Ronnie stopped helping you people. Last I heard you were leaving the forum.
And Ronnie is not a liar by the way. This I know, and as far as making money on a web shop, I am out thousands of dollars for this research. Never made a penny. That is not what it is about
I see that you are so smart, that you have a cell functioning....You know exactly how it works, BUT you don't have a cell working, So You stoop to a spoiled crybabys level and call Ronnie a Liar.
But still you have no cell working.....
-
That's amazing how people are blind.
Stan Meyer devices ARE FRAUD!
1st The alternator demo cell:
Do some math and you will take some real conclusions, idiot.
Calculate how many gas is on a 1 liter cylinder at 7 PSI, look how many amps it was really drawing,
Independent test ealuation report said 12.5V*40A do some MMW calculations, now who is the asshole?
2nd Plate cell another scam:
Get the data from the same document (2 to 3 MMW not better).
Look to the Resonant charging b$hit choke: 2 wires biffilar, look to the pics form Don the way it is connected, the inductances cancel each other, only left the wire resistance.
Amp inhibit what?
Make some calculations, ohms law!
What is inhibit? your brain?
3rd The VIC cards on the buggy:
There is no way it was working with that component values on the driver circuit (that resistor I think it was 22k or something).
Nobody saw it working and Don confirmed that.
You are the smarter man, because people believe in your scams too
-
You really a piece of work ..... Idiot Just because you dont know how it works, everyone else is a scam ? It is apparent by your statements, that you are not educated enough.
Be careful calling me a scam, I will sue your ass off for everything you have . Defamation of character is no joke. And I have plenty of lawyer money.
You can call Stan Meyer a Fraud all you want, your ignorance does not befront me. But call me a fraud ?
Go away child, go cry in the corner because you dont understand the tech.
-
This is the time you start to cry like a baby... oh she is crying!
HOW MUCH GAS DO YOU HAVE IN ONE LITER CAVITY AT 7 PSI ?
Answer:....
-
Boyle's Law ...
-
I only share with decent people, You are not a decent person.
-
The only thing that is true is that you can choose to use voltage with low current and pay the price, low efficiency.
Thats why Meyer said that cant disprove the "mode of operation using voltage potential".
Do the math, idiot...
-
I have no interest in talking with an idiot, please fuck off and die. You are living a useless life.
-
I can tell you, idiot, that alternator demo MMW was near to 3.
Do some homework and dont believe in Santa...
-
You are a Jerk and childish.
If you were a serious man you start to check this numbers.
-
Steve , can you just delete this thread and my membership too. I really tried to stir up interest in hho again. But really I have no time in my life to deal with this. This guy will do nothing to help further hho research. And now I am not interested in helping anyone anymore.
-
Cry baby cry...
-
Steve already measured the amount of gas in one liter cavity with some friend.
He can tell you or you just can do the math...
P.S. I am building the alternator version
-
X-Baby, you must have me confused with someone that gives a shit what you are saying. You are inconsequential to me. If you died today , I would not care. and by the way you carry yourself, not many would care if you died today
-
Idiot. Go to school, learn some math then behave like a man, damn!
Who cares about your engines running on wall power? lol
-
Edward Mitchell was another idiot like you.
Pulling so many power to his cell, creating steam bubbles and calling it Hydrogen.
This board have that amazing scientific content...
-
Edward Mitchell was another idiot like you.
Pulling so many power to his cell, creating steam bubbles and calling it Hydrogen.
This board have that amazing scientific content...
-
I wouldnt bother with it either Neal...at least here with so many guests and 2 users...its not worth the time to even log in much any more.
-
am i not looking on the forum for a couple of days , do i see this childisch behaviour.
Please act as adults.
Thanks.
-
all those people who run away, i dont understand.
If you want to share yr results, then please do so.
Why run when 1 person is negative?
Dont go in discussion with him but appreciate thr good people.
Its the same on all forums, sadly enough.
New Guy, really?
-
Hi guys.
I apologize about that, but I was sincere and a lot of people over this boards know that Ronnie said a lot of nonsense and contradictions, he was making people loose their time and money with crap theories and until today nobody saw his damn cell working.
He only wants attention and bear with me for being honest about my thinking.
It wasnt me who started do go to the level of name calling, and one advice to you all:
Dont be affraid to say what you thing about SCAMS because some people try to get advantage against the others with less knowledge about this "technology".
I will not take off any word I said about Meyer demo Cells, and about Ronnie.
-
all those people who run away, i dont understand.
If you want to share yr results, then please do so.
Why run when 1 person is negative?
Dont go in discussion with him but appreciate thr good people.
Its the same on all forums, sadly enough.
New Guy, really?
Yea i dont appreciate the attacks on Neal and Ronnie.
Nobody has to follow anybody ,those that think they wasted time and money following anybody with this stuff wasnt in it for the right reason to begin with.
I cant speak for everyone but its really hard to want to engage with a research group with 800 guests that contributes jack shit compared with the usual 5 or 6 members.
Id suggest finding a way to get the 800 guests to engage in discussion and be a real part of the group or close ther eyes.I cant be the only one not interested in such a huge silent audience.
P.s.
Hope everybody had a nice summer and ready for the season once again :)
-
Hi guys.
I apologize about that, but I was sincere and a lot of people over this boards know that Ronnie said a lot of nonsense and contradictions, he was making people loose their time and money with crap theories and until today nobody saw his damn cell working.
He only wants attention and bear with me for being honest about my thinking.
It wasnt me who started do go to the level of name calling, and one advice to you all:
Dont be affraid to say what you thing about SCAMS because some people try to get advantage against the others with less knowledge about this "technology".
I will not take off any word I said about Meyer demo Cells, and about Ronnie.
Hi X blade,
I understand your frustrations. I really do.
I only cannot state that Ronnie or Neal or Stan are frauds, because i could not replicate their work.
We have seen videos of Stan.
It would be so much easier if Ron or Neal or somebody else from his peer group would post a video in which they show their claims.
I must say that i liked Rons explanation, in contrast to you. But thats all personal.
Cheers
-
all those people who run away, i dont understand.
If you want to share yr results, then please do so.
Why run when 1 person is negative?
Dont go in discussion with him but appreciate thr good people.
Its the same on all forums, sadly enough.
New Guy, really?
Yea i dont appreciate the attacks on Neal and Ronnie.
Nobody has to follow anybody ,those that think they wasted time and money following anybody with this stuff wasnt in it for the right reason to begin with.
I cant speak for everyone but its really hard to want to engage with a research group with 800 guests that contributes jack shit compared with the usual 5 or 6 members.
Id suggest finding a way to get the 800 guests to engage in discussion and be a real part of the group or close ther eyes.I cant be the only one not interested in such a huge silent audience.
P.s.
Hope everybody had a nice summer and ready for the season once again :)
The summer was great. Thanks. I became a dad for the fourth time :)
So, most of my free time is consumed by the little one. But in some weeks, i might be back on the project.
You know, many of us are frustrated by not seeing real results after putting a lot of money in the project.
Members walk away to other forums and just sneak peak here.
If you have any suggestions what to do to change that, then please let me know.
I run this forum from my hart for years. I funded it out of my own pocket.
I have seen attacks, technically and written ones.
I just wanted to create a place where we inventors / replicators can exchange info.
Not a bulley place or whatever else.
I share what i did.
I hope to inspire others as well.
But ill gues the light goes slowly out with a lot of guys....Which i understand too.
Hope you stay for a while and if you find another nice forum, please let me know....
Cheers
Steve
-
Edward Mitchell was another idiot like you.
Pulling so many power to his cell, creating steam bubbles and calling it Hydrogen.
This board have that amazing scientific content...
sorry Neal. You are not an idiot.
X blade` please choose other words.
For me.
thanks
Steve
-
For
Water Fuel Engines and Power plants See
Secure Supplies
Daniel Donatelli
Those using them already thanks