Stanley Meyer > Stanleys Alternator

Electrical Pulse Generator

(1/3) > >>

Donaldwfc:
This thing interested me right from the start, I didn't really understand it until today, but i always thought it was neat. Why did stan invent it? Should I build one? I looks like a better alternator and thats it? what was it really doing?

I was reading the patent again, and I was looking closer at how it worked, and I noticed a few things, but they didn't really click.

Then tonight I was at a friends place and I started explaining everything to him, and he asked a single thing that made all the pieces fall into place.

He asked "does it increase the watts?"

I said no, just the voltage... and bam.

Everything about the Electrical Pulse Generator fell into place. Go read the patent, see if you can see what's going on.




The Electrical Pulse Generator is:
-an improvement on the alternator.
-a voltage multiplier
-a pulsed input provides a pulsed output
-a current limiter

The Electrical Pulse Generator does everything the VIC does, take the output from it and attach it to your tubes, and i bet you'll be splitting water right away.

Steve:
 sure you get gas, but only as much as the total amps provide.
Nothing more.

br
steve

Donaldwfc:
i bet you can run the drive pulley off of a turbine that is powered by the gas pressure, there are no opposing magnetic fields so this thing should spin as free as the bearings will let it. you will just have to kick-start it off of a small motor.

Also it wont be the amps doing the work, this will restrict amps, you put 40 watts into the EPG, at 12 volts, that leaves 3.3 amps, then you pull the voltage up to what ever you want, 20,000 volts, that'll leave you with 0.002 amps going to the cell, this accomplishes exactly what the VIC does, except it doesn't need electrical resonance, and you don't need a diode or ss wire. you can wrap the little bobbins with thin copper wire, say 0.005", and do 1000 turns per bobbin, 36 bobbins per layer, at least 4 layers, that could be 144,000 turns just from the bobbins, not to mention the two secondaries. this thing can definitely produce high voltage and restrict amps. and send pulses to the cell, what more do you need?

sure the vic coil is probably cheaper and easier to make, once you know exactly how to build it, but this thing would work no matter how you built it as long as you aimed for high voltage.

WaytoGo:

Yes, and with two of these you will get  20.000 Volts easy.. ;D


http://images.google.no/imgres?imgurl=http://www.rika.com/company_e/images/l_3generator.jpg&imgrefurl=http://www.rika.com/company_e/3generator.html&usg=__Y4S7x45zoWP-Ne9FdDY7jf9Fqyo=&h=1047&w=740&sz=315&hl=no&start=14&um=1&tbnid=4ljkvvFEP-XJRM:&tbnh=150&tbnw=106&prev=/images%3Fq%3Delectrostatic%2Bgenerator%26hl%3Dno%26rlz%3D1T4GGLJ_noNO268NO270%26sa%3DN%26um%3D1

Steve:

--- Quote from: Donaldwfc on April 09, 2009, 20:52:20 pm ---i bet you can run the drive pulley off of a turbine that is powered by the gas pressure, there are no opposing magnetic fields so this thing should spin as free as the bearings will let it. you will just have to kick-start it off of a small motor.

Also it wont be the amps doing the work, this will restrict amps, you put 40 watts into the EPG, at 12 volts, that leaves 3.3 amps, then you pull the voltage up to what ever you want, 20,000 volts, that'll leave you with 0.002 amps going to the cell, this accomplishes exactly what the VIC does, except it doesn't need electrical resonance, and you don't need a diode or ss wire. you can wrap the little bobbins with thin copper wire, say 0.005", and do 1000 turns per bobbin, 36 bobbins per layer, at least 4 layers, that could be 144,000 turns just from the bobbins, not to mention the two secondaries. this thing can definitely produce high voltage and restrict amps. and send pulses to the cell, what more do you need?

sure the vic coil is probably cheaper and easier to make, once you know exactly how to build it, but this thing would work no matter how you built it as long as you aimed for high voltage.

--- End quote ---

What we need more?
We need just 1 sign.
That sign must be that HV does work and not amps.

Till that moment.....

To be honest, i just had one of my many brainfarts too.
HV or Static voltage has different rules if you talk about conduction.
Maybe we should start a topic on that?

br
Steve

Navigation

[0] Message Index

[#] Next page

Go to full version