Projects by members > Webmug

Alternator setup

(1/2) > >>

webmug:
Hi everyone,

I like to share my alternator setup which is a work in progress but has some results.

The screenshot below shows a 55Amps alternator and a washing machine motor specs: 220V/3Amps (max 2750rpms) an oldie.

(http://www.ionizationx.com/index.php?action=dlattach;topic=995.0;attach=3737;image)

I have a problem with the pulley ratio because I cannot get the thing of the motor, is there anyone who knows how to get it off?

(http://www.ionizationx.com/index.php?action=dlattach;topic=995.0;attach=3739;image)

Below is the setup wired, because the alternator has a Delta connection, changed it to a Wye connection, removed the internal regulator and pulled out the rectifier bridge.

(http://www.ionizationx.com/index.php?action=dlattach;topic=995.0;attach=3741;image)

Below the setup complete with scope, power source and Lawton circuit connected.

(http://www.ionizationx.com/index.php?action=dlattach;topic=995.0;attach=3743;image)

Below screenshot shows the used schematic pulsed with the Lawton circuit, currently only one tube is used.

(http://www.ionizationx.com/index.php?action=dlattach;topic=995.0;attach=3745;image)

When running we can adjust the gating signal to form the shown waveforms, don’t know if its good but it’s producing some stuff.

(http://www.ionizationx.com/index.php?action=dlattach;topic=995.0;attach=3747;image)

Also here is a video and picture of the results with 0.5Amps 12,6Volts onto the rotor and the motor running on 200Volts. Don’t know the Amps yet, still need an amp meter.
I used rain water, so I don't get the brown yellow stuff fast.

http://www.ionizationx.com/index.php?action=dlattach;topic=995.0;attach=3750

(http://www.ionizationx.com/index.php?action=dlattach;topic=995.0;attach=3749;image)

The motor I’m currently using is getting hot and is to weak for the harmonics setup and needs a larger pulley to get to it higher.

haithar:
that waveform just looks how it should look! where do you measure the blue line? at the tube?

on picture IMG2315.JPG, is the box a transformer? are the two coils bifilar?

webmug:

--- Quote from: haithar on April 17, 2009, 19:47:02 pm ---that waveform just looks how it should look! where do you measure the blue line? at the tube?

on picture IMG2315.JPG, is the box a transformer? are the two coils bifilar?

--- End quote ---

The yellow one is the Lawton pulse with gating on, and the blue one is over the cell.

Yes the two coils are biffs, but they are not connected and a DC-DC transformer.

haithar:

--- Quote from: webmug on April 17, 2009, 20:18:17 pm ---
--- Quote from: haithar on April 17, 2009, 19:47:02 pm ---that waveform just looks how it should look! where do you measure the blue line? at the tube?

on picture IMG2315.JPG, is the box a transformer? are the two coils bifilar?

--- End quote ---

The yellow one is the Lawton pulse with gating on, and the blue one is over the cell.


--- End quote ---
then  the waveform is exactly as it should. the only thing important is the power consumption of the whole system.
anyway, good work!

haroldcr:

 If that motor pulling the Alternator is getting hot, a bigger pulley will do WORSE. You need a bigger HP motor.

Navigation

[0] Message Index

[#] Next page

Go to full version