Author Topic: This Video  (Read 7987 times)

0 Members and 1 Guest are viewing this topic.

Offline Login to see usernames

  • Hero member
  • ****
  • Posts: 980
This Video
« on: May 02, 2009, 19:29:25 pm »

Offline Login to see usernames

  • Hero member
  • ****
  • Posts: 657
Re: This Video
« Reply #1 on: May 02, 2009, 20:35:34 pm »
donald the concept he explains in the beginning is exactly what is going on in the vic and wfc setup....this is why there are multiple frequencies in the meyers equations once set at "resonance"....there are resonant pulses and a resonant frequency.

this is perfect....this is why andrija puharich and meyers actually have a shit load in common.

Offline Login to see usernames

  • Hero member
  • ****
  • Posts: 980
Re: This Video
« Reply #2 on: May 02, 2009, 20:56:31 pm »
I knew you would value this video :)


Offline Login to see usernames

  • Hero member
  • ****
  • Posts: 657
Re: This Video
« Reply #3 on: May 02, 2009, 20:58:59 pm »
modulating the output...soo good . thank you this explains it perfectly.

after i get something to eat i will finally punch out the numbers in the tech brief for the frequencies.

and possibly draw up a picture.

Offline Login to see usernames

  • Administrator
  • Hero member
  • ****
  • Posts: 4462
    • water structure and science
Re: This Video
« Reply #4 on: May 02, 2009, 21:46:35 pm »
Great video! ;)

Steve

Offline Login to see usernames

  • Hero member
  • ****
  • Posts: 657
Re: This Video
« Reply #5 on: May 02, 2009, 23:35:00 pm »
alright so to get a conversion of 12 volts 3.3 amps (40 watts) to 40,000 volts at .001 amps (40watts) we need a Z = 12,000....with R= 11,600 ohms then XL-XC= 3,073 ohms.

given information in the tech brief states that a tube size of 3 inches in height with .75 outer diameter .5 inner diameter .0625 wall thickness has a resonant frequency with the vic of around 5,000 hz. (he later also calls this resonant pulse)

so with the tube specifications and the dialetric constant of water equaling 78.54 ohms we get 9.4583E-11 farads

now here is where i am confused.....this wording is very tricky here
(http://i2.photobucket.com/albums/y2/kinesisfilms/perhertz.jpg)

what does this 2,500 discrete pulses in a 50% duty cycle per hz mean.......it isn't just a difficult way of saying 2.5khz is it?......the 50% duty cycle per hz throws me off.

electrojolt...if you happen to read this what is your take on this?

Offline Login to see usernames

  • Sr. member
  • ***
  • Posts: 368
  • Yes I got Jolted,
Re: This Video
« Reply #6 on: May 02, 2009, 23:57:03 pm »
When I read this sometime ago, I saw it as:

the 5Khz is the resonace freq of the transformer (VIC) then the .5hz is the gating.

when I tested John's VIC, It did generate a sine wave (resonace) I didn't have a chance to check the freq, the chokes burned up too fast.

but I did see a pure sine wave just by placing the scope probe close to the VIC.

so a .5Hz = to a on pulse duration of one second.  Then this means that you pulse 5Khz for one second, and then off for one second.

and in once second 5 KHz (50% duty)  =  to 2500 on pulses and 2500 off pulses.

Offline Login to see usernames

  • Hero member
  • ****
  • Posts: 657
Re: This Video
« Reply #7 on: May 03, 2009, 00:46:41 am »
i understand now.....thank you very much!