Ionizationx: a clean environment is a human right!
Projects by members => Projects by members => J. Miller => Topic started by: jim miller on June 19, 2012, 13:29:06 pm
-
A4 thorzpower: liked your design of linear rail mag beam gas device. AI suggested multiple argon injectors along
the length of the containment tube for lubrication as well as a very slight taper on the main tube to provide some back pressure. AI indicated that neons higher viscosity might be an option since the FeAr is not recirculating as in the circlular EPGs. On the taper design dont forget that containment coil spacing will need to be reduced because as the containment tube diameter is reduced, the mag flux density will have to be adjusted as the contaiment coil diameter is reduced. follow the helmholtz toroidal coil spacing rule. think KISS, single mag gas rope, zero twist.
Q4 cernbird: with thorzpowers permission I sent the dwg files for the mag beam device. see what your AI engine makes of it
A4 cernbird: that was a fast crunch, thank your SuperMUC pals
Q4 cernbird: see what they can do with the nano Fe Argon slurry injector dwgs. AI engine says min 2mm
A4 cernbird: well at least some computers can agree but one problem may be the spectral overlap of the xenon flash tubes for the laze and the target argon slurry, Any ideas?
Q4 cernbird: please send the He:Ar ratios for best ouptut
-
I got a magazine today at the nuclear center here where i read that nano-sized iron particles had very increased magneticity
-
in the 50 nm range , many strange properties emerge
-
whats the magazine title and page or reference if you know regarding iron and magneticity