Author Topic: How the VIC Works - IMPORTANT!  (Read 34359 times)

0 Members and 1 Guest are viewing this topic.

Offline Login to see usernames

  • Moderator
  • Sr. member
  • ***
  • Posts: 421
Re: How the VIC Works - Induced DC Current Voltage
« Reply #88 on: April 21, 2015, 03:21:34 am »
This is the wave form we are looking for is it not?

I'm presently working with 1kV to 2kV peaks with very little current.

I am presently running with a resonant frequency around 6.8kHz and a very low gate pulse, probably around 30Hz.  Duty cycle on the primary frequency is high.  Duty cycle on the gate frequency is low.   You can see the frequency doubling in the pic as it shows 18kHz.  The voltage doubling is also present.

Obviously, these frequencies are setup specific.

I'm not happy with the step up as it drops two steps before each step up.  Seems to be related to the output of one of the PWMs.
« Last Edit: April 21, 2015, 19:16:54 pm by timeshell »

Offline Login to see usernames

  • Administrator
  • Hero member
  • ****
  • Posts: 4441
    • water structure and science
Re: How the VIC Works - Induced DC Current Voltage
« Reply #89 on: April 21, 2015, 14:32:25 pm »
How did you measure TS? Over the cell, or coils included?
And did you see already more gas?


Steve

Offline Login to see usernames

  • Moderator
  • Sr. member
  • ***
  • Posts: 421
Re: How the VIC Works - Induced DC Current Voltage
« Reply #90 on: April 21, 2015, 14:41:48 pm »
How did you measure TS? Over the cell, or coils included?
And did you see already more gas?


Steve

Over cell and coil coupled to primary.   No gas yet.  Still perfecting the wave form and voltage intensity.

Offline Login to see usernames

  • Moderator
  • Sr. member
  • ***
  • Posts: 421
Re: How the VIC Works - Induced DC Current Voltage
« Reply #91 on: April 25, 2015, 01:11:21 am »
In short, I have come to a reasonable certainty that Tony's VIC circuit as is is not capable of working correctly to charge the water cell.

Also from my experiences with my PWMs and my observation and studying the 4046 chip, I believe that using the 4046 as the main frequency driver is not suitable and will never produce the desired result. 

Alternatively, there is a problem with my copy of the circuit that I haven't yet been able to determine.

However, I will also not pretend that I have high experience  or am an expert using 4046 or circuit design.  I could be wrong.  I am just commenting about my experience and conclusions up to this point.

I have turned instead to the boards being provided by Ronnie Walker and Neal Ward at http://www.stanmeyerreplications.net and will start testing with them this weekend.
« Last Edit: April 27, 2015, 05:21:42 am by timeshell »

Offline Login to see usernames

  • Administrator
  • Hero member
  • ****
  • Posts: 4441
    • water structure and science
Re: How the VIC Works - Induced DC Current Voltage
« Reply #92 on: April 25, 2015, 14:09:40 pm »
In short, I have come to a reasonable certainty that Tony's VIC circuit as is is not capable of working correctly to charge the water cell.

Also from my experiences with my PWMs and my observation and studying the 4046 chip, I believe that using the 4046 as the main frequency driver is not suitable and will never produce the desired result.

I have turned instead to the boards being provided by Ronnie Walker and Neal Ward at http://www.stanmeyerreplications.net and will start testing with them this weekend.

good luck this weekend TS

cheers

Offline Login to see usernames

  • Moderator
  • Sr. member
  • ***
  • Posts: 421
Re: How the VIC Works - Induced DC Current Voltage
« Reply #93 on: April 27, 2015, 05:21:04 am »
Haven't gotten to actual testing yet.  Assembled most components and waiting for some more to come on Tuesday.

Offline Login to see usernames

  • Moderator
  • Sr. member
  • ***
  • Posts: 421
Re: How the VIC Works - Induced DC Current Voltage
« Reply #94 on: April 29, 2015, 18:47:22 pm »
First pic of sperm wave of resonance signal using RWalker and Neal Ward circuits.


Offline Login to see usernames

  • Moderator
  • Sr. member
  • ***
  • Posts: 421
Re: How the VIC Works - Induced DC Current Voltage
« Reply #95 on: April 30, 2015, 22:08:18 pm »
WFC improvements.  Sealed outer tubes in industrial electrical shrink tubing.