Author Topic: Rotary Pulse Voltage Frequency Generator Assembly  (Read 148405 times)

0 Members and 3 Guests are viewing this topic.

Offline Login to see usernames

  • Sr. member
  • ***
  • Posts: 387
Re: Rotary Pulse Voltage Frequency Generator Assembly
« Reply #72 on: October 12, 2009, 14:30:29 pm »
Hrm, I would just like to state, The date i registered at waterfuelcell.org is about a month or 2 after i had started researching stan. I would also like to add, eight, (8) hours a day was nothing, I contributed about 12 hours most days, "Including sundays" and to be honest, I do not remember a day that i didn't research stan. Some days "I didn't even sleep."

The research i did was "More" than an 40 hour week job, "I simply loved what i was doing." And, Dating back i have about 3 years Plus "OverTime" Researching nothing but stan. Again, for 3 years, "I isolated my self from the outside world." Up until a few months back, "I backed off."

By now, I think i have a Pretty good ideal what stan was up to, Not to speak, "I spent all me hard earned dollars" on that man.

If you want to end up where I am at, its going to be a long confusing road, I've been down that road already. I'm just stating to you, in my mind, This appears "Silly," Thats as far is i will go with that. I have given Plausable recomendations of how i think stan was running that beetle, And, best by research it best fits his explainitations.

I do not mind watching you, "Try" to attempt the road i've already been down, Which is why i am stepping to the side.

It was my goal to put here what i could Before i ran out of time, It's now here what i wanted to share. It is here now in one spot not strolled all over hundreds of post. These are my words i wish to leave behind, And the words are good.

I wish you all the best of luck, finding resonance of which stan demonstraights, Good Luck.
Respect for that.
If you want to render your hard work and tons of hours time to something valuable, share all your notes and tests with us, so people can continue with your findings, without reinventing the wheel.
[or is it already online?]

Offline Login to see usernames

  • Moderator
  • Hero member
  • ****
  • Posts: 980
Re: Rotary Pulse Voltage Frequency Generator Assembly
« Reply #73 on: October 12, 2009, 16:53:45 pm »
That's a lot of time Warp, a lot of dedication, and I would love to see it pay off with a working WFC. I know you got that VIC working with the high voltage, which is something nobody else has shown, but there is more to be done, and more things to try, and to take things to the next level.

Maybe after you get your stuff done in December you can reconstruct that VIC with the high voltage and we'll see if we can take those results and nail down the exact important specs and components so we can reproduce it and take it to the next level.

So many things haven't been tried, EPG, Mixing Exhaust Gasses, Rotary VIC, PLL Driver, Spherical resonant cavity... Even the Variable Spacing Plate Cell for which we have all the schematics for. Stacked resonant cavities... Hydrogen Gas Gun. Stan spent over 20 years on this, so we can't have figured everything out in even  5 years. It's going to take more than this.

Offline Login to see usernames

  • Member
  • **
  • Posts: 223
Re: Rotary Pulse Voltage Frequency Generator Assembly
« Reply #74 on: October 13, 2009, 11:48:26 am »
There is more than the 3 phase alternator and the simple alternator schematics he shows in the techbrief involved:
look at the 2 pics below, one taken from video above which is his old design version with alternator, and one from his latest versions. There are similarities. I think he is doing something very important right there.

Offline Login to see usernames

  • Member
  • **
  • Posts: 223
Re: Rotary Pulse Voltage Frequency Generator Assembly
« Reply #75 on: October 13, 2009, 11:58:00 am »
the same old model with alternator.
I wish I can see what`s there written on all the labels right next to each led and switch !

Offline Login to see usernames

  • Sr. member
  • ***
  • Posts: 363
Re: Rotary Pulse Voltage Frequency Generator Assembly
« Reply #76 on: October 13, 2009, 16:49:18 pm »
I think I can help with that wish.Enjoy!

Online Login to see usernames

  • Administrator
  • Hero member
  • ****
  • Posts: 4441
    • water structure and science
Re: Rotary Pulse Voltage Frequency Generator Assembly
« Reply #77 on: October 13, 2009, 17:21:35 pm »
I think I can help with that wish.Enjoy!

Don, thank you sooooo much! Great pic. It answers many questions!

Steve




Offline Login to see usernames

  • Moderator
  • Hero member
  • ****
  • Posts: 980
Re: Rotary Pulse Voltage Frequency Generator Assembly
« Reply #78 on: October 13, 2009, 18:21:11 pm »
Thank you Don, that is a wonderful picture !

Knowing that that cell uses 10 tubes is useful, I might imagine they are 10, 3 inch tubes, do you have any details of the other cells or systems this ties into?

(http://img.photobucket.com/albums/v81/bigbuba/dunebuggy.jpg)

Here we see it on the dune buggy in this set up. It might be nice to see what that Resonant Cavity looks like.

Just so I don't have to keep clicking on it to view it, i'll re-post the full picture here too, i hope nobody minds
(http://img.photobucket.com/albums/v81/bigbuba/PICT0003.jpg)

Offline Login to see usernames

  • Moderator
  • Hero member
  • ****
  • Posts: 980
Re: Rotary Pulse Voltage Frequency Generator Assembly
« Reply #79 on: October 13, 2009, 18:51:13 pm »
(http://img.photobucket.com/albums/v81/bigbuba/untitled.jpg)
Here we see the same, or similar, Resonant Cavity, and some other components, I am not sure why the RC and the Injectors are shown together, becuase they are used in different systems, but maybe just for comparison.

Here is another picture of a set up on the dune buggy that shows the same type of RC
(http://img.photobucket.com/albums/v81/bigbuba/untitled1-1.jpg)

Something I just realized, is that the Gas Processor does not have a driving circuit in the same place as the SR and the RC's, so it must be driven independently... more details there too look into.