Ionizationx: a clean environment is a human right!
Stanley Meyer => Patents, documents and pictures of Stanley Meyer => Topic started by: Steve on January 17, 2009, 12:08:16 pm
-
Hi,
Please drop here your documents and pictures of Stan Meyer.
Here is my part.
Some of them might already have been published, but some maybe not.
br
Steve
-
more
-
more
-
more
-
more
-
more
-
Some more photos.
Flag 8)
-
Found another pic.
Flag 8)
-
Here are a couple of pictures of Stans VIC coil and the bobbins used to make it.Keep in mind the laminate core is @ 3/4 inch square,2 3/4 inch dia. and 3 inches long.
-
Someone posted this cell design on the Yahoo group.
-
the twins
-
guess who
-
I have come across this picture, but I can not find any original file it was a part of, has anyone else the original file with this picture?
-
Looks like there is more than the tech brief!
Two pages from Memo 435! (TB only shows memo 420 to 430)
-
Here is an exceptionally clean picture of the top of the demo cell.
Also this picture, which I have seen before, of the dunebuggy, it says it is from memo 422, BUT it is not in the TB??
-
Some screenshots from the Colorado video, first time I've ever seen Stan's Scope
-
Here are the schematics to replicate the variable plate controller vic.I got this info directly from the control box.
Enjoy!
Don
-
at the bottom of the "WFC News Letters No 8.pdf" there is a list of the publications.
WFC technical brief
WFC Sales manual
WFC News Releases
WFC video tape.
i have not seen the video tape entitled
"the birth of New Technology"
"WFC Hydrogen Gas Management (GMS) System"
anyone have that one?
and there is another one at the bottom of Letters no 11
"the birth of New Technology"
"WFC Water Fuel Injection System ®
(dunno where quote ends on this one)
-
more pics
-
Here's a pic of the resonance cell,and tube set with contactors
Don
-
Awesome Don, thank you.
The electrical connections do not protrude out the side of the cell, so i am lead to think that the delrin block all the tube sets are sunk into comes out of the main cell casing, is this so? can you describe the water flow system into this cell and the electrical connections with a bit more detail? In regards to the water flow, i am wondering if the water is sent only through tubes, forced through the tubes, compared to just being pumped into the cell and allowed to come up through the center.
-
There was a cover on the bottom of the cell chamber,that covers the wire from view.Also there was a positive and a negative wire for every tube set,and not just one positive going to all tubes.
The water is pumped up through every tube set and it goes out through the large hole in the center of the cell chamber back to the holding tank.
Don
-
Hi Don,
So in the end there were independent positives? Still valid if so... Do you still have access to his equipment?
Thanks again.
Fabio
-
Everything is gone again,and I don't have any access to it now.
Don
-
And here is the PCB from the buggy's VIC.
Thanks to Dynodon!
-
Mr. Don,
Do you have any clarification on the amp inhibiting resonant charging chokes in the 8XA box?
How was this wrapped - each row by itself?
I do not understand what is meant by 'row'.
Basically, it is two physical wires being wound at the same time, correct?
Thanks for any more info on this...
Praise the Lord and pass the ammunition!
-
Yes the wires are wound together side by side(bifiller) and the term means rows or layers if you want to call it that
Don
-
Thanks for the clarification. What can I say, the circuit works beautifully as promised!
Excellent production at .5 amp... more output than 'brute force' electrolysis cells at 10 amps!
I still need to measure the coil inductance - just to be thorough.
Now on to deeper Meyer truths, resonant scanning, steam resonators, etc... ;)
Praise the Lord and pass the ammunition!
-
Thanks for the clarification. What can I say, the circuit works beautifully as promised!
Excellent production at .5 amp... more output than 'brute force' electrolysis cells at 10 amps!
I still need to measure the coil inductance - just to be thorough.
Now on to deeper Meyer truths, resonant scanning, steam resonators, etc... ;)
Nice to hear this man! Would you like to share us your results (photos, videos..)? Good luck to your further researching.
-
Thanks Shadow -
To avoid cluttering this board with off-topic info (this is a replication and not original Stan Meyer documents),
I have posted my replication here: http://www.ionizationx.com/index.php?topic=1976.0