Author Topic: Complete VIC Circuit!  (Read 15700 times)

0 Members and 1 Guest are viewing this topic.

Offline Hidden

  • Member
  • **
  • Posts: 184
Re: Complete VIC Circuit!
« Reply #8 on: June 20, 2011, 17:53:56 pm »
Tony,
 
It is nice work, no doubt that you should be funded for your efforts.  I too would like to build your circuit from a schematic.  $300 is worth it yet I find great pleasure in putting these circuits together.
 
Could you please share the schematic with members in some private fashion?
 
thanks
 
kb

Offline Hidden

  • Moderator
  • Sr. member
  • ***
  • Posts: 460
    • Global Kast : Water Fuel Cell Research
Re: Complete VIC Circuit!
« Reply #9 on: June 20, 2011, 21:11:20 pm »
Sorry I can't release the schematics for this circuit. Me & the group of people I've been working with on this circuit wont allow me to release it. We've put too much time into this to just give it away for free. We had the circuit worked out long before the images of the circuit were actually made public by Don. I wish I could just release everything, but I have been advised not too. Sorry guys, maybe at a later date I will be able to release the schematics.

Offline Hidden

  • 50+
  • *
  • Posts: 85
Re: Complete VIC Circuit!
« Reply #10 on: June 22, 2011, 01:58:44 am »
Sorry I can't release the schematics for this circuit. Me & the group of people I've been working with on this circuit wont allow me to release it. We've put too much time into this to just give it away for free. We had the circuit worked out long before the images of the circuit were actually made public by Don. I wish I could just release everything, but I have been advised not too. Sorry guys, maybe at a later date I will be able to release the schematics.

ok point taken.
There is just so much information spread over many locations about stans work, would it be possible to , say, list what documents the rest of us should then study to also unravel the circuit also as not all may have the required funds to pay for a build board and thus need to make it themselves.
thanks

Offline Hidden

  • Moderator
  • Sr. member
  • ***
  • Posts: 460
    • Global Kast : Water Fuel Cell Research
Re: Complete VIC Circuit!
« Reply #11 on: June 22, 2011, 02:13:36 am »
The function of the circuit is explained in the PDF file "The Birth of New Technology" starting on page 44, Memo WFC 422 DA. Also refer to Patent #92007861 for the basic schematic. Then cross check all this information with images of the circuit that Don was selling. Take those images and trace down all the circuit pins for the chips. It will take you a few days to traced down all the traces for the IC's. Then build the circuit on a bread board and test it out. Once you feel that the circuit is correct and functioning properly, use Eagle or some other program to make the PCB layout. That simple, but not really, as it will take time to accomplish all this. Its taken me 8 months while working with my group of guys to get this all done.

Offline Hidden

  • 50+
  • *
  • Posts: 85
Re: Complete VIC Circuit!
« Reply #12 on: June 22, 2011, 02:30:25 am »
Thankyou kindly.

The files referenced to can be found at:
http://www.ionizationx.com/index.php/topic,1871.0.html

* WO1992007861A1   CONTROL AND DRIVER CIRCUITS FOR A HYDROGEN GAS FUEL PRODUCING CELL.pdf (570.28 kB - downloaded 13 times.)
http://www.ionizationx.com/index.php?action=dlattach;topic=1871.0;attach=6473

* The Birth of New Technology - S.Meyer.pdf (9174.94 kB - downloaded 14 times.)
http://www.ionizationx.com/index.php?action=dlattach;topic=1871.0;attach=6449

as for the images don is selling, .....dont have those so will have to attempt to work it out what thats available. thanks

Offline Hidden

  • Moderator
  • Sr. member
  • ***
  • Posts: 460
    • Global Kast : Water Fuel Cell Research
Re: Complete VIC Circuit!
« Reply #13 on: June 22, 2011, 04:24:27 am »
if you wanna see all the images I have them on my website http://www.globalkast.com/photos.htm

Offline Hidden

  • Jr. member
  • *
  • Posts: 8
Re: Complete VIC Circuit!
« Reply #14 on: June 22, 2011, 06:45:33 am »
Nice work Tony and thanks for support!

A question to you - have you tried to connect your scheme and measure gas production (if it is)?
You've told that you can get 1700 volts across the cell using your circuit and 6-1 transformer - how many milliamps?

We all appreciate your work, but would like to understand - is it worth spending big money on your scheme (300$ * 10 times)
or make sense to dig in another direction.

p.s. Your site is a brilliant too!

Offline Hidden

  • Moderator
  • Sr. member
  • ***
  • Posts: 460
    • Global Kast : Water Fuel Cell Research
Re: Complete VIC Circuit!
« Reply #15 on: June 22, 2011, 07:00:19 am »
Thanks Shadowfc....The 1700v I got was when I replaced my single tube cell with a real 10nF capacitor. I dont have a properly made cell yet. In order for this to work you need a 10 tube cell similar to Stan's Resonant Cavity. I also need a ferrite core for my 5 VIC Transformer so I can test with it, but overall the circuit works cuz with the real capacitor in place the circuit would find and lock onto the resonant frequency and produce HV's. From the looks of Stan's circuits and system with the VIC Cards, he only used one of the VIC cards to power the cell and the others must have been spares.